Electronics Forum | Tue Nov 24 14:29:26 EST 2015 | dilogic
This looks like faulty VGA card (the one from which VGA cables come out) in the VME rack. They are notorius and fail often. Sometimes you can replace VRAM chips and fix it...
Electronics Forum | Thu Dec 31 19:25:11 EST 2015 | ttheis
Resolved. Thanks to some information provided by the fine folks over at Capital Equipment Exchange I was able to update the system to a EXP-VID-B video card, replacing the EXM-13A and EXM-14 combination. This update eliminates the jumper cable betwe
Electronics Forum | Tue Apr 13 14:41:56 EDT 1999 | tornado
Dear sir ; my name is ahmed i am engineer in a good well prepared factury for making computers M/B AND ALL KIND OF CARDS ACCESSORIES (FAX/MODEM , VGA , SOUND , .... ) MY TASK NOW IS TO GIVE THEM THE INFORMATION ABOUT THE SUPPLIERS OF VGA CAR
Electronics Forum | Wed Aug 31 17:23:00 EDT 2016 | corepride
Hi everyone, I have a problem with the 630 VME vision system: during startup machine, an error popup appears saying "Did not receive request to load machine model within timeout period. Possible machine error condition exists. Do you want to continu
Electronics Forum | Tue Dec 01 23:24:34 EST 2015 | ttheis
Can anyone advise if the EXM-10A ethernet card is the correct model for a GSM1 machine vintage 1995 and which slot in the VME rack it should populate? Thanks
Electronics Forum | Sat Mar 11 22:07:35 EST 2023 | recard
Hi Duro. The problem is that my VME card and ISA card was tested in another machine and both are working. So I suspect the CAN boards or Motherboard.
Electronics Forum | Wed Aug 12 11:01:37 EDT 2015 | bnorton
Machine->Config and set all their addresses to 0. We have swapped the EPC5, the VGA Video, the Force board, and most recently the Lantern 630VME. Watching the Force board COMM2 with Logicomm, at the end of all the ldx file processing it changes to c
Electronics Forum | Sun Aug 13 22:31:58 EDT 2023 | cspasol
Hi! I have encountered this problem so many times. Here are the possible cause of your machine problem. 1. PCI board or PCI to motherboard cable. 2. VME memmory card. 3. VME board itself. 4. Power supply for VME board. Hope could help.
Electronics Forum | Fri Sep 02 09:10:20 EDT 2016 | ttheis
Probably similar cost to find one on ebay or a used machine broker vs. repair unless the fault is obvious from visual inspection. I would be interested to know if anyone does service cards from these older VME chassis though.
Electronics Forum | Mon Dec 07 16:43:32 EST 2015 | ilavu
Here you go..... Look at the attached file.
