Electronics Forum | Tue Jun 25 21:13:10 EDT 2024 | jeremyc
I also happen to be running into this issue. A PCB we're trying to program has a width larger than the max board width. On our O2i, it says 12.992in is the max board width. HOWEVER the tech specs of Dek Horizon O2i advertise a max print area of 508m
Electronics Forum | Wed Mar 26 09:26:12 EDT 2008 | lloyd
I know you said you checked your clamps but another look will do no harm. we had a very similar issue a while back, and it turned out that the plastic shim under the chase clamp magnet was damaged. This caused the chase clamps not to release properly
Electronics Forum | Thu Jun 07 13:49:21 EDT 2007 | rrozell
I am working on finding out the foot prints of Panasonic MV2V and a GSM2.
Electronics Forum | Mon Jun 03 14:37:22 EDT 2024 | carl_p
You can download the full UIC nozzle library from them direct. They will also do the custom nozzle for you. you could also go out to the local CNC places etc. As for materials, depends what will work for the part in question. stainless is an option
Electronics Forum | Wed Oct 07 03:34:11 EDT 1998 | Thomas Blesinger
I am trying to find out, what possibilities I have, to print solder paste on a board, when the task is to have 120 Microns thickness for the biggest part of the board (85% of the real estate), and then have 250 Microns of thickness on the remaining
Electronics Forum | Wed Mar 05 17:03:36 EST 2008 | ratsalad
We had the misfortune of ending up with a batch of Kester EM907 that would start to "set up" well before it's shelf life was over. Since the lead time for a new batch was excessive, a Kester technical guru came to our facility to help us deal with t
Electronics Forum | Wed Oct 07 06:22:23 EDT 1998 | Charles Stringer
| I am trying to find out, what possibilities I have, to print solder paste on a board, when the task is to have 120 Microns thickness for the biggest part of the board (85% of the real estate), and then have 250 Microns of thickness on the remainin
Electronics Forum | Thu Oct 08 07:04:54 EDT 1998 | JGodfrey
| I am trying to find out, what possibilities I have, to print solder paste on a board, when the task is to have 120 Microns thickness for the biggest part of the board (85% of the real estate), and then have 250 Microns of thickness on the remainin
Electronics Forum | Wed Oct 07 11:05:16 EDT 1998 | Dave F
| I am trying to find out, what possibilities I have, to print solder paste on a board, when the task is to have 120 Microns thickness for the biggest part of the board (85% of the real estate), and then have 250 Microns of thickness on the remainin
Electronics Forum | Wed Oct 07 14:28:25 EDT 1998 | MMurphy
| I am trying to find out, what possibilities I have, to print solder paste on a board, when the task is to have 120 Microns thickness for the biggest part of the board (85% of the real estate), and then have 250 Microns of thickness on the remainin