Electronics Forum | Tue Nov 27 19:41:53 EST 2007 | g2garyg2
Well, there seems to be many opinions, many of which could be correct, however... With the proper laser they can be quite good for soldering. Here are a few guidelines I would like to suggest. 1) Have your product soldered first (by the vendor) 2) T
Electronics Forum | Sat Apr 03 19:58:53 EST 2004 | Ken
I have used tooling holes and fiucial registration since the late '80's. In fact if your maximum "vision" tolerance is +/- 0.05mm, your in the same ball-park as locating pins. It is true that fiducial registration is more accurate. However, I woul
Electronics Forum | Thu Jul 19 09:56:52 EDT 2001 | Damian Holzmann
The obvious difference between 2D and 3D is that an accurate volumetric measurement can only be obtained with a 3D measuring system. Laser line measurement in 2D does not allow accurate volumetric measurement. If you modify the aperture in a stencil
Electronics Forum | Wed Dec 23 20:06:26 EST 2020 | marcelorotofrance
Hi, I'm using a "ye olde" Quad 4c Mk2 built in 1995 for eight years. During that period I had to change 3 HDD (now it runs a compact flash with and free DOS), 3 Z-rod bellows,3 laser heads, some monitors, nozzles and misc parts. Despite that it has t
Electronics Forum | Thu Jul 12 17:43:50 EDT 2001 | Steve
In order to understand your printing process, you cannot rely soley on 2D inspection. By implementing 3D-true volumetric measurement, a more comprehensive approach to correcting the process variation can be established. True volumetric / 3D inspect
Electronics Forum | Thu Sep 12 20:42:16 EDT 2013 | marcelorotofrance
Jorge: Nosotros tenemos una óptica 0KM embalada perteneciente a Martín. Se la dio a Bruno cuando palmó la nuestra, sin embargo el equipo nuestro tiene el otro modelo. Si querés pasala a buscar y la probás. Estoy seguro que es la solución al problema,
Electronics Forum | Wed Oct 02 13:54:39 EDT 2019 | fundomikey
Hello, I have a problem with settings vision for LED (similar to this one: https://www.lumex.com/news/SML-LXIL0603-narrow-beam.html) on JUKI KE3020. The LED is mounted on the side. At the beginning I would like to say that laser recognition is impos
Electronics Forum | Tue Aug 13 10:31:17 EDT 2019 | sankarseptember
I am using YJ Link Laser Marking Machine.The problem we are facing is some times machine make a light barcode(not readable) which becomes no read in scan and vision and machine continue to pass the panel.. How to stop machine automatically if board n
Electronics Forum | Wed Mar 21 09:57:06 EDT 2007 | charles
Hi friend, Can be possible with 1st & 4th head. But if you want do vision test , it is impossible. Only laser test , yes it could be . If you want to do vision test, you have buy Ke2060 with MNVC option.
Electronics Forum | Wed Oct 02 18:26:49 EDT 2019 | tey422
First of all, General Vision for Juki is not easy to learn/understand, it would be the last option if other centering method fails; only advance Juki package programmer would want to play with General Vision. If possible, using laser recognition woul
Industrial Sensor Vision International specializes in advanced camera technology of high resolution fast speed cameras for automation, AOI, 2-D/3-D, SPI inspection and wafer inspection.
3 Morse Road 2A
Oxford, CT USA
Phone: +1 203 592 8723
