Electronics Forum | Thu Apr 22 01:15:36 EDT 2021 | bangir
Hi All, I am looking for part numbers vitronics XPM2-820. Anyone can share me the manual book/parts list? Thanks
Electronics Forum | Fri Feb 16 04:15:57 EST 2018 | sachinverma
hi , please check the main S/w. of the Reflow machine.
Electronics Forum | Fri Nov 23 12:37:54 EST 2018 | mnorthey
I have worked on some SMR-800, 820's. What seems to be the problem.
Electronics Forum | Fri Jun 06 15:12:05 EDT 2008 | tomwho
Can anyone give me a contact for someone who sells used vitronic reflow oven parts. I am look for heater panels or heater wire for a vitronics smr-820 reflow oven,or some place that can replace the heater line in them. Thank you
Electronics Forum | Fri Jan 12 09:22:51 EST 2018 | dskling
Hello We have a Vitronics XPM820 that has us stumped. We have replaced both power supplies (G1 and G2) and we still cannot clear this alarm. The A1 board has all 4 leds light for proper voltages. We have verified that we are getting the correct vo
Electronics Forum | Wed Mar 26 08:39:32 EDT 2008 | gabriella
Hello all, I have a interface card(PC) down on one of our Vitronics ovens model SMR-820A. The PC is very old. The card is mounted on ISA slot. Vitronics don't support these any more. Can anyone advise where I can find one of these cards or if I can
Electronics Forum | Thu Oct 28 15:17:43 EDT 2004 | russ
I would look at Vitronics-Soltec such as the XPM 820 or even the 520. BTU also makes very nice ovens. The Hellers I used to use went through blowers every 6 mos. and both of them came it defective. You must have got lucky or I got unlucky. Russ
Electronics Forum | Fri Feb 03 16:55:20 EST 2017 | westshoredesign
We have 6 Vitronics Soltec ovens. 4 XPM 820's, an XPM 1240, and an XPM3. All of them are great, but we're very impressed with the XPM3, you can't go wrong.
Electronics Forum | Wed Feb 14 15:49:30 EST 2018 | cbart
Did you check each leg alone to ensure you have proper incoming voltage to the machine on each individual line? any other 3 phase issues in the building? do you have a UPS for pc and conveyor purposes? is that failing?
Electronics Forum | Tue Jul 22 16:51:14 EDT 2008 | maxpower097
OK I have read though all the treads and learned more. One more question if someone can answer it. Can I do this myself on site? We have a Vitronics Soltec XPM820 Reflow Oven. Or do I need a super special oven for component baking.. Thanks max
