Electronics Forum | Thu Feb 21 06:18:42 EST 2013 | cbeneat
We run 3 Vitronics XPM2's, our newest is 3 years, oldest is 6+ and I have not seen our rails warp the way you're describing. I would be plenty frustrated if I had to replace rails this often.
Electronics Forum | Wed Feb 20 16:03:19 EST 2013 | bocci572
I am wondering if anyone has had issues with their Heller oven rails warping. It appears that our 1800EXL and 1900W oven rails sag after time. They eventually contact the safety mesh and then create hestitation of the chain, thus creating defects.
Electronics Forum | Thu Feb 21 08:52:24 EST 2013 | emeto
Currently having Elecrtovert and BTU - no problems with both. Before use to have Vitronics aand Heller - and no problems with the rails. However I had other problems with Heller which makes me think that they are going deeper with the bad quality par
Electronics Forum | Wed Feb 27 11:20:15 EST 2013 | marcpeo
Sorry to hear of the difficulty with the rails on these systems. The 2 machines mentioned are 10 years old or more. The rails typcially last quite a while but replacement after 10 years is possible. Please feel free to e-mail me directly to discus
Electronics Forum | Fri Mar 08 16:30:53 EST 2013 | pctech
We have 1880 Heller about 12 years old and running like a charm everyday. I doubt that lead or non-lead operations will have anything to do with it. Do you use high temperature lubricant on edge hold chain and rail periodically? This may help to ease
Electronics Forum | Thu Apr 20 17:22:47 EDT 2006 | russ
Can you run the first side on a mesh belt to keep it from warping?
Electronics Forum | Thu Oct 13 16:08:37 EDT 2022 | proy
No we can't change any of the copper, and that I believe is likley the primary cause of the warp
Electronics Forum | Fri Aug 03 16:32:20 EDT 2001 | davef
Occasionally, we see boards that warp during reflow and are a real pain to fixture because: * Not all boards warp the same. * We try to modify our prcess to reduce warping, once we realize there's a problem. How would a fixture arrangement like your
Electronics Forum | Fri Jul 16 08:14:15 EDT 2010 | vetteboy86
We're expereincing issues in our pick and place machine due to what I consider a server warping of the PCB. The PCB is received this way from our PCB manufacturer. Before I push to much, I would like to know options for a cause. The warp is so bad,
Electronics Forum | Mon Jun 26 16:56:54 EDT 2000 | FlynHi
Why do you want to go to WARP? I hope someone did not suggest WARP was the answer to some problem. I don't think you will have any trouble upgrading to WARP.