Electronics Forum | Fri May 07 16:58:26 EDT 2004 | davef
Manage the speed of the board and the speed of the wave to be nearly same at the point where the leads leave the wave.
Electronics Forum | Wed Jun 11 08:58:26 EDT 2003 | Frank
Thanks again Dave for your information. Merci beaucoup Frank
Electronics Forum | Sun Apr 11 13:00:14 EDT 2004 | david coombes
hi please could you tell me where the glass you use came from
Electronics Forum | Thu May 06 17:42:20 EDT 2004 | Ken
tell us a your setup parmeters. What is your dwell time? What flux are you using?
Electronics Forum | Wed Jun 11 15:57:39 EDT 2003 | pjc
Frank, ECD (WaveRIDER) and Datapaq (Optimiser) have wave solder machine process control devices. They will check the following: 1. Conveyor speed 2. Preheat Temps 3. Solder Temps 4. Wave Dwell/Contact Times 5. Wave Heights 6. Waves Parallelism Go
Electronics Forum | Wed Jun 11 09:16:05 EDT 2003 | davef
Il ne pas de quois. Two most important parameters are: * Solder temperature * Dwell time Immersion depth [1/3 to 2/3 of board thickness] has the least impact of any variable in wave soldering.
Electronics Forum | Thu Jun 12 20:16:33 EDT 2003 | danhui888
Try using ECD Wave Rider. This system will helps you on taking the parameter of the machines. It will helps you. Let me have your eamil ID so that I can send some information to you with an attachment. Regards Danny Hui
Electronics Forum | Thu May 06 20:14:58 EDT 2004 | gregoryyork
sorry one other thing are you sure your getting 2 -3 seconds dwell after you reset the wave? Or is the dwell much longer?
Electronics Forum | Thu Jun 19 23:46:39 EDT 2003 | Vic Banuelos
Hi Frank In adition I recomend you reading Chapter 12 from SMT principles and practice by Ray P. Prasad, Chapman & Hall. You'll find a good guide for profiling. Good luck
Electronics Forum | Wed Jun 18 10:42:07 EDT 2003 | caldon
Frank- Dreamsniper touched on something I totally forgot about....DROSS.....This is a subtle way for $$$$ to be lost. If it is silver and Shiney...it does not belong in the dross recycle bin. That is good Solder being tossed. You can also add into
winsouce.jpg)
