Electronics Forum | Mon Oct 03 05:10:19 EDT 2016 | robl
Hi Nikhilesh, It was a long time ago, but we used to buy the nickel in reels then had a cut and feed station on the smt machine with selectable sizes. We did many types of boards in very large volumes, and usually the Nickel strip was soldered to t
Electronics Forum | Tue May 17 03:48:51 EDT 2005 | Base
YV100, easy... YV112 uses a dual work-area, dual gantry machine in which the gantry does X and the PCB-table does Y movements. Also each gantry can only work on one PCB work-area and can pick form only one side of the machine. Basically you have two
Electronics Forum | Tue Sep 03 13:11:10 EDT 2024 | spoiltforchoice
You question implies they already have UIC machines so already know what to expect and presumably know what they need. If they already have UIC machines, they're already invested in the platform, feeders etc and so this could well be a complete no br
Electronics Forum | Thu Apr 14 03:52:23 EDT 2016 | steve Wu
Hi,this is Steve from Chinasky Laser Technology Co.,Ltd.focusing on laser marking machine and laser welding machine.I'd like to make a discussion on laser issues with you,when it necessary.My skype:stevewu11.
Electronics Forum | Tue Nov 01 10:48:24 EST 2005 | Rob
Can't say too much about the solder joints issue, but about a decade ago we did have a lot of problems with resonators being damaged by harmonics from Ultrasonic board washing & Ultrasonic welding. However this mostly manifested itself as cracking i
Electronics Forum | Wed Sep 29 08:44:57 EDT 2004 | davef
Nothing to say that you can't purchase thermocouple wire and spot weld it in the machine shop at your local high school.
Electronics Forum | Thu Oct 26 04:36:05 EDT 2006 | aj
All, We have a Ultrasonic Welder "Sonotronic 35/1200" manufacturer M.E.E. in Johanesburg. The machine was here when I started and we use it probably once or twice a year. Basicall welds a Plastic key housing together,. I have no manuals for this m
Electronics Forum | Fri Aug 12 05:24:35 EDT 2022 | ttheis
We recently parted out a GSM machine that we could not get operational. As parts came off of the machine it looked like the frame would make the world's strongest welding/work table. We stripped the frame bare and flipped it over instead of scrapping
Electronics Forum | Fri Aug 14 07:52:03 EDT 2015 | mun4o
Hi all, 2 weeks ago we installing a new P&P machine - chip shooter.But , after installation proved that vibration of the new P&P arе very strong.If I use mashine to 100% of the speed the machine vibrating and after 2-3 panels moving 3-5 mm.The machin
Electronics Forum | Tue Sep 12 11:50:12 EDT 2023 | ttheis
I heard a similar story from a colleague on these machines. Same thing- head and beam not secured for transit and banged around whole trip. I think the beam ended up bent in that case and the machine could never be calibrated or repaired. Don't know