Electronics Forum | Wed Nov 23 16:24:26 EST 2016 | misterblonde
Hello, I am new to this forum, and was hoping to get some advice/information from those of you that have switched your wave soldering machine to SN100C. I have read some old threads about people having great success with SN100C. My question is- w
Electronics Forum | Tue Jun 21 15:21:08 EDT 2022 | proceng1
Are they applying a dross reducing powder, like what you would use in a Wave solder pot?
Electronics Forum | Tue Dec 08 12:44:52 EST 2020 | janwillemreusink
Who is using two sorts of tin in one selective soldering machine with to solder pots? So then the soldering program selects the correct pot (tin). What are the risks? Adding wrong tin in the wrong pot. Mixing up the nozzles?
Electronics Forum | Tue Feb 01 18:45:31 EST 2022 | proceng1
It's not that model, but that's what we use.
Electronics Forum | Tue Jun 05 02:10:01 EDT 2018 | buckcho
Hello sir, Limits in SPI can vary a lot, also depending on finishing of the pcb. For example 170% volume on an IC (assuming is fine pitch) can be okay for ENIG, but very bad if HASL. For are I would recommend that you use either 50-130, or 60-135 max
Electronics Forum | Wed Apr 21 21:27:11 EDT 2004 | davef
Dreamy "Ball rolling"? Are you a bowler? My nephew does the audio for the ESPN2 production of the professional bowling tour. Search the fine SMTnet Archives for discussion on assessing cleaning machines. For instance: http://www.smtnet.com/forum
Electronics Forum | Mon May 14 04:00:15 EDT 2018 | sarah2018
Before you buy glue dispensing machine, you need tell the supplier two question as below: Two questions before purchase 1.What’s type of glue do you use ? What’s the base characteristic ? A)One-component or two-component (A&B glue)； B)What is the A
Electronics Forum | Thu Feb 16 18:14:45 EST 2006 | Geo E
We have just purchased a humidity logger and I need to know what the relitive humidity should be in a SMT production area. The Room is enclosed approx. 60ft by 30ft using ESD Floor tile. 3 machines are in the room as well as some Thru hole machines.
Electronics Forum | Mon Mar 21 10:40:33 EST 2005 | emeto
Hello all, Can you tell me what standart is used for communication between machines in production line. I don't mean SMEMA. There is a standart for machine communication, they can communicate one with another. That is the way for example AOI says th
Electronics Forum | Wed Aug 02 03:07:43 EDT 2023 | cbeneat
We use NPM and CM machines. What we've seen is the part will stick to the top tape on occasion and get flipped, either upside down, or reverse. Adjust the tape/cover so the top tape is pulled while the part is still under the cover. This is usually t
