Electronics Forum | Fri Apr 03 02:52:42 EST 1998 | Jacqueline Coia
At this moment in time we are using water soluble solder paste on our PCBs these are cleaned using water only, agitated with ultrasonics. After drying a white/grey residue is left around solder joints. Reflow profile is fine and a reliable wash proce
Electronics Forum | Mon Apr 22 16:55:42 EDT 2002 | russ
Greetings All, Anybody out there experiencing white residues after cleaning? We currently use a batch cleaner to clean water soluble fluxes. this cleaner makes its own DI water by means of carbon and resin tanks. After cleaning there are residues
Electronics Forum | Mon May 26 11:02:17 EDT 2008 | jandon
Hi Mr. Necdet Ozyonum, Recently we did have same kind of problems when we use lead free reflow profile for leaded solder paste (AIM WS-483). There where solder resist lacks, we found white residue after aqueous cleaning. Not in the solder joints but
Electronics Forum | Sun Apr 05 18:59:15 EDT 1998 | Graham Naisbitt
Jaqueline There are so many variables in the electronic assembly manufacturing process involving more than 12 different chemistries, that it is impossible to easily identify and determine the nature and reason of such residues. GEC Hirst Research in
Electronics Forum | Fri Apr 03 08:22:36 EST 1998 | Scott Cook
| At this moment in time we are using water soluble solder paste on our PCBs these are cleaned using water only, agitated with ultrasonics. After drying a white/grey residue is left around solder joints. Reflow profile is fine and a reliable wash pro
Electronics Forum | Sun May 25 10:30:31 EDT 2008 | necdetozyonum
Dear All, I would like to take your opinion about the result that we have faced after cleaning the PC assemblies in a cleaning machine (Miele Dishwasher) with the cleaning detergent Qualitek Everkleen 1005. We use DI water for cleaning purpose in t
Electronics Forum | Mon Jul 26 16:31:02 EDT 2004 | Sue PH
We use Kester 186 flux and the STU people would sometimes find white residue after cleaning with Isopropyl at the solder station. We have Lenium (Petroferm)in our vapor degreasers, and now they use Lenium at their stations as well as final clean, an
Electronics Forum | Mon Jan 26 11:46:16 EST 1998 | Rin Or
| I have a problem! The solder on my pc boards look great comeing out | of my reflow oven. They go thrue the rest of the prossese | and at the end at the qc station it's cold or whitish or gray not shiny. | does any one have a idea on how to correct
Electronics Forum | Wed Jan 27 19:42:34 EST 1999 | parag palshikar
i am working with the noclean process and getting white residues on the bottomside of the board probably due to the wave soldering flux.i am using a no-clean solder paste and a noclean wave solder flux.The boards passed the accelerated temperature a
Electronics Forum | Fri Jan 31 03:39:26 EST 2003 | NP
EC7M is clean up solvent that can help to prevent white residue problem. It made from Orange shield. Good luck
