Electronics Forum | Tue Jun 30 11:39:21 EDT 2020 | stephendo
The best I saw was two people set up and then two other people verify the set up. They still managed to wrong parts on. Day shift loaded the parts but did not have time for the independent check. Afternoon thought that the second check had been done
Electronics Forum | Tue Jun 30 17:47:57 EDT 2020 | rsatmech
Manual method is always risky. Evening with all sorts of scanning people are loading it wrongly. Below are the recommendations I have. (Kindly comment if anything don't seems to be a solution) 1) peer to peer check - once loaded check the value usin
Electronics Forum | Thu Jun 25 12:05:34 EDT 2020 | spoiltforchoice
There is a fairly recent one. And all the conculsions need things you don't have. Buddy loading - so one person loading one verifying everything. Barcodes - gets rid of people misreading labels mixing up 4k7 with 47K or nbot seeing a decimal point o
Electronics Forum | Tue Oct 23 21:18:04 EDT 2007 | darby
Have just discovered wrongly labelled resistor from YAGEO RC0805FR-072K2L Date 200706, Which should be 2k2. Part is in fact 22r.
Electronics Forum | Thu Jun 06 09:03:48 EDT 2019 | bobpan
If the part is 10mm or less as long as you are scanning it near the top...it should work. The other possible problem is dirt on the quadalign lens. Clean off the lens and watch it when it homes....both heads should home the same way. If the head jum
Electronics Forum | Wed Oct 24 01:44:49 EDT 2007 | darby
Will do Dave - we will have to eat humble pie though. Have just been informed that part is in fact correct value. Problem was caused by different markings on two different supplier cases. Marking on one was 222, on t'other twas 2201,this was interpr
Electronics Forum | Thu Jun 25 11:30:18 EDT 2020 | kylehunter
I'd love to see a thread focused on various methodologies used for general inventory management schemes, but primarily on procedures to ensure the proper parts get loaded on the pick and place. We have an Assembleon pick and place, so there is no fe
Electronics Forum | Mon Jun 29 19:15:19 EDT 2020 | emeto
The only way is to get a whole system that is smart - there are several out there. I had Mycronic towers, Mycronic machines and smart feeders and all is connected together. Plus the machine measures values for all passive components. Once machine mak
Electronics Forum | Wed Jul 01 16:00:54 EDT 2020 | spoiltforchoice
https://smtnet.com/Forums/index.cfm?fuseaction=view_thread&CFApp=1&Thread_ID=22488&#Message84305 Previous thread for reference
Electronics Forum | Fri Jun 27 16:36:54 EDT 2008 | wrongway
I have lots of those parts don't go by the arrow it is a vender marking has nothing to do with the polarity go by the belveled edge you can't go wrong
