Electronics Forum | Tue May 31 16:52:57 EDT 2011 | xray
Hi SSager, Check out the FA Inspector. It provides 1 Automatic Detection Mode and 2 Manual Inspection Modes. Its used to automate First Article Inspection Tasks and enhance today's principally manual process using microscopes and pen and paper. T
Electronics Forum | Tue Nov 27 03:39:49 EST 2018 | bukas
problem solved, it was corrupted system file.
Electronics Forum | Tue Nov 20 02:26:11 EST 2018 | bukas
hello everyone, I have this problem with one of my machines. it reports EMER error code: e804 "the scale of X axis can not be detected" has anyone encountered such error before? any idea what could cause it?
Electronics Forum | Fri Nov 23 11:41:27 EST 2018 | dalsenkenneth
Hello, bukas! Still experiencing the same thing until now?
Electronics Forum | Mon Nov 26 02:09:55 EST 2018 | bukas
yes I am, today im going to try to load backup image on to HDD. this error occurs before any machine movement, so it might be SW error... at least I hope so
Electronics Forum | Mon Oct 20 21:57:58 EDT 2008 | jdt13
The problem that I see is the pads not soldered and I can see on the X-Ray the solder on the pad after reflow, and yes the solder has melted in a uniform fashion, I have not measured the diference of temperatures in each pad of the PCB, the size is a
Electronics Forum | Thu Feb 14 23:32:50 EST 2013 | padawanlinuxero
Hello ! I don't know if this helps but here goes, I have here 2 mydatas one a TP9-4 and the other MY12, on the TP9-4 we have TPSys 2.4 and we use a AM8 feeder magazine, when we bought the MY12 it came with TPSys 2.1, thinking we can use the AM8 feede
Electronics Forum | Wed Sep 04 13:58:36 EDT 2019 | smrsteve
Hello Bobpan, Thanks for the response. 1. Function 30 gives me a consistent 182-185, even after nozzle changes. I can vary this by changing mod code 15 and I have been advised to aim for 90-110, but it doesn't seem to make any difference so I've go
Electronics Forum | Wed Oct 22 06:06:54 EDT 2008 | stanyserrao
1CA64011 and 1CAFE011 UsedBy Display 1CA??011 Cause The Vision_type in part data is expressed using hexadecimal notation ("??"). If "??" equals 1E, 64, 78, 79, AC, or FE then boundary detection could not begin because the nozzle was bent.
Electronics Forum | Wed Jun 25 21:31:42 EDT 2008 | chrisgriffin
Sounds like the mouse driver is in the software, but it is not detecting the mouse. My guess is the mouse or connection. If you do need a driver, I've got some. You can give me a call if you need any help. Chris 918-851-3370
.png)
