Electronics Forum | Fri Sep 14 19:55:06 EDT 2018 | amartineck
I have a GSM1 that when try to zero it, it stops with the "Timeout waiting for spindle up" message. To get thsi up and running, I have set all my machine settings to default and had to reselect the head from a C4 1 head to the flex head. I initially
Electronics Forum | Thu May 31 18:21:09 EDT 2007 | jamesm
Revelation Industries has an Electrovert MPK1-24774. The manual lacks sufficient information to troubleshoot and fix this problem: Reference: Minipack 300 Wavesoldering System 1986 edition, pg, 18, fluxer, Threshold adjustment. After completin
Electronics Forum | Fri Mar 18 15:02:07 EST 2005 | pmd
Please clarify, Z axis gears (Blades)? The MPM head I believe is what your are asking is driven up and down via a lead screw. The machine gets the zero point from the "HAT" tactile sensor in the table nest. When squegees are installed the blades are
Electronics Forum | Mon Aug 02 13:06:10 EDT 2004 | jbabson1
If the CP7 is like the CP643, it defaults to the MAX size unless that nozzle is skipped. Then it would switch to the next smaller nozzle on that head.
Electronics Forum | Fri Mar 27 12:50:35 EDT 2015 | swiese242
We use FLEXA v5.6 and yes, the license support > CP8 machine. Hi Michael, Give me your email and I will send you screen shots on my Flexa settings with my CP743.
Electronics Forum | Thu Mar 12 00:32:12 EDT 2015 | mdang
I am setting Fuji Flexa to communicate with CP8 machine. When I create a new machine, I has to fill out the following value Machine Communication Server: ? Get Production Data : (yes/no) GEM Host Name: ? Disable GEM : (Yes/no) TCP/IP Port #: ? I c
Electronics Forum | Tue Jul 20 04:16:02 EDT 2004 | Charles Huang
Wondering if there any CP7/F4G programmers out there that can help me out with this one. I'm assuming the setting for max and min nozzle in the "environment" section of the part data would allow me to use either the specified max OR min nozzle in th
Electronics Forum | Fri Mar 13 10:24:35 EDT 2015 | assuredtech
I am setting Fuji Flexa to communicate with CP8 > machine. When I create a new machine, I has to > fill out the following value Machine > Communication Server: ? Get Production Data : > (yes/no) GEM Host Name: ? Disable GEM : > (Yes/no) TCP/IP
Electronics Forum | Sat May 29 15:58:37 EDT 2004 | Patrick Tarell ... Automation Engineering Jabil Circuit
Hello Alan! We have used both chipshooters, we also have a Mydata with the hydra head... We switched entirely from Fuji CP7 to the UIC HSP4796 and now HSP4797. The CP7 is a nice machine but we were very unhappy with the support structure within Fu
Electronics Forum | Sat Jun 08 22:18:28 EDT 2002 | liuguoyu
Now I have a set of F4G system,4 CP742E and 8 QP341,how do I connect them?
.gif)
winsouce.jpg)