GPD Global | https://www.gpd-global.com/co_website/pdf/pump/Jetting-Pump-for-Retrofit-Integration.pdf
(mounting without Taper Lock) G 38.10 mm (1.50”) H 34.93 mm (1.375”) I 12.70 mm (0.500”) ITEM DIMENSION J 25.40 mm (1.00”) K 38.10 mm (1.50”) L 50.80 mm (2.00”) M 28.58 mm (1.125”) N 116.21 mm (4.575”) ITEM DIMENSION O
GPD Global | https://www.gpd-global.com/pdf/pump/Jetting-Pump-for-Retrofit-Integration.pdf
(mounting without Taper Lock) G 38.10 mm (1.50”) H 34.93 mm (1.375”) I 12.70 mm (0.500”) ITEM DIMENSION J 25.40 mm (1.00”) K 38.10 mm (1.50”) L 50.80 mm (2.00”) M 28.58 mm (1.125”) N 116.21 mm (4.575”) ITEM DIMENSION O
GPD Global | https://www.gpd-global.com/co_website/pdf/pump/Jetting-Pump-for-Retrofit-Integration-Chinese.pdf
，控制器到喷射阀(标准配置) 1.5 米 项目 尺寸 A 94.49 毫米 (3.72 寸) B 90.42 毫米 (3.56 寸) C 89.15 毫米 (3.51 寸) D 44.20 毫米 (1.74 寸) E 12.95 毫米 (0.51 寸) 项目 尺寸 F 2X 直径 0.188 寸 通孔 (无须Taper Lock硬件安装) G 38.10 毫米 (1.50 寸) H 34.93 毫米 (1.375 寸) I 12.70 毫米 (0.500 寸) 项目 尺寸 J 25.40 毫米
GPD Global | https://www.gpd-global.com/pdf/pump/Jetting-Pump-for-Retrofit-Integration-Chinese.pdf
，控制器到喷射阀(标准配置) 1.5 米 项目 尺寸 A 94.49 毫米 (3.72 寸) B 90.42 毫米 (3.56 寸) C 89.15 毫米 (3.51 寸) D 44.20 毫米 (1.74 寸) E 12.95 毫米 (0.51 寸) 项目 尺寸 F 2X 直径 0.188 寸 通孔 (无须Taper Lock硬件安装) G 38.10 毫米 (1.50 寸) H 34.93 毫米 (1.375 寸) I 12.70 毫米 (0.500 寸) 项目 尺寸 J 25.40 毫米
GPD Global | https://www.gpd-global.com/co_website/pdf/lead-former/CF9-User-Guide-901-1-07.pdf
exit chute • Component transfer belt • Transfer belt guide and component tape pressure plate (located on either side of transfer belt) b. Raise die block approximately 1" (25.40 mm) from machine upright plate using machine's die block adjusting bolt
GPD Global | https://www.gpd-global.com/pdf/lead-former/CF9-User-Guide-901-1-07.pdf
exit chute • Component transfer belt • Transfer belt guide and component tape pressure plate (located on either side of transfer belt) b. Raise die block approximately 1" (25.40 mm) from machine upright plate using machine's die block adjusting bolt
GPD Global | https://www.gpd-global.com/co_website/pdf/lead-former/CF9-Doc-Package-901-1-01.pdf
component tape pressure plate (located on either side of transfer belt) b. Raise die block approximately 1" (25.40 mm) from machine upright plate using machine's die block adjusting bolt (Figure 20, Item 3). c. Remove mounting screws from micrometer scale's
GPD Global | https://www.gpd-global.com/pdf/lead-former/CF9-Doc-Package-901-1-01.pdf
component tape pressure plate (located on either side of transfer belt) b. Raise die block approximately 1" (25.40 mm) from machine upright plate using machine's die block adjusting bolt (Figure 20, Item 3). c. Remove mounting screws from micrometer scale's
| 1 |
