Surface Mount Technology Association (SMTA) | https://www.smta.org/icsr/speaker_forms/Paper-Format-Requirements.doc
] that the immersion silver surface finish selected for lead-free PCBs had the susceptibility to creep corrode when used in high sulfur and high humidity environments
Surface Mount Technology Association (SMTA) | https://www.smta.org/knowledge/journal.cfm
. Abstract 32-2 The Study of Dissolution of Bi Precipitates in Sn Using a Novel In Situ Heating Technique in the SEM Peter Banh, André M. Delhaise, Doug D. Perovic Abstract 32-2 Tin Whisker Formation in Bismuth-Containing Lead-Free Solder Alloys After Long-Term Ambient Temperature, High Humidity Storage, Part I
Heller Industries Inc. | https://hellerindustries.com/wp-content/uploads/2018/07/pan_APEX06.pdf
), and the inherent strength of the solder all factor into the reliability of the solder joint. This paper presents experimental results on the effect of reflow profile on both 63%Sn 37%Pb (SnPb) and 96.5%Sn 3.0%Ag 0.5%Cu (SAC 305
Heller Industries Inc. | https://hellerindustries.com/wp-content/uploads/2022/04/pan_APEX06-1.pdf
), and the inherent strength of the solder all factor into the reliability of the solder joint. This paper presents experimental results on the effect of reflow profile on both 63%Sn 37%Pb (SnPb) and 96.5%Sn 3.0%Ag 0.5%Cu (SAC 305
40731 | https://www.smta.org/smtai/SMTAI-2019-Technical-Program.pdf?v=200609010628
Surface Mount Technology Association (SMTA)
40731 | https://www.smta.org/smtai/SMTAI-2019-Technical-Program.pdf?v=200622100619
Surface Mount Technology Association (SMTA)
| https://www.eptac.com/wp-content/uploads/2015/03/ecss_q_st_70_18c-space-product-assurance-rf-coax-cables.pdf
5.2.1 Solder a. The supplier shall use solder ribbon, wire and preforms, provided that the alloy and flux conform to the requirements on “material selection” of ECSS‐Q‐ST‐70‐08. NOTE 1 The following solder alloys are approved: • 60 Sn
| 1 |
