| http://etasmt.com/te_news_bulletin/2021-09-02/24761.chtml
), decreasing cooling and condensation efficiencies. The time period for this may vary depending on the type of solder paste flux used, the weekly consumption rate of paste, and oven temperature profiles
| http://etasmt.com:9060/te_news_bulletin/2021-09-02/24761.chtml
), decreasing cooling and condensation efficiencies. The time period for this may vary depending on the type of solder paste flux used, the weekly consumption rate of paste, and oven temperature profiles
1st Place Machinery Inc. | http://www.firstplacemachinery.com/firstplace_plastics_chillers_broad.html
. The units have Zero run time and are BRAND NEW ! Retail Price is 3,000,000/ all four. Great Opportunity to Save Money !! Cooling Information and Specifications Provide Chilled Water for Residential Air Conditioning and Industrial Cooling Produce Chilled Water Over 41 degree F Cooling Capacity 1653 USRt Chilled Outlet
| http://etasmt.com/cc?ID=te_news_bulletin,21161&url=_print
. The cooling rate will affect the strength of the solder joint. In this section, the lead-tin powder in the solder paste has melted and fully wetted the surface to be connected
| http://etasmt.com/cc?ID=te_news_bulletin,14361&url=_print
. Reflow soldering cooling zone temperature setting: The reflow soldering cooling zone rate should be 4 ° C / sec. The reflow soldering oven temperature setting varies depending on the state and structure of the reflow soldering heat sink
| http://etasmt.com/cc?ID=te_news_bulletin,15361&url=_print
. Reflow soldering cooling zone temperature setting: The reflow soldering cooling zone rate should be 4 ° C / sec. The reflow oven temperature setting varies depending on the state and structure of the reflow soldering heat sink
| http://etasmt.com/cc?ID=te_news_bulletin,15961&url=_print
. The role of the cooling zone is to let the temperature drop to solidify the solder joint, and the cooling rate will affect the strength of the solder joint
| http://etasmt.com:9060/te_news_bulletin/2020-12-11/21161.chtml
. The cooling rate will affect the strength of the solder joint. In this section, the lead-tin powder in the solder paste has melted and fully wetted the surface to be connected
| http://etasmt.com/te_news_bulletin/2020-12-11/21161.chtml
. The cooling rate will affect the strength of the solder joint. In this section, the lead-tin powder in the solder paste has melted and fully wetted the surface to be connected
| http://etasmt.com:9060/cc?ID=te_news_bulletin,25361&url=_print
: With the EXOS 10/26, Ersa presents a convection reflow soldering system with 22 heating and four cooling zones as well as a vacuum chamber after the peak zone, with which the void rate can be reduced by 99
.gif)
winsouce.jpg)
