| http://etasmt.com/cc?ID=te_news_bulletin,14961&url=_print
. The second is the application of solder alloys with different melting points. The alloy with a higher melting point is used for the first side and the alloy with a lower melting point is used for the second side
| http://etasmt.com/te_news_bulletin/2020-03-28/14961.chtml
. The second is the application of solder alloys with different melting points. The alloy with a higher melting point is used for the first side and the alloy with a lower melting point is used for the second side
ASYMTEK Products | Nordson Electronics Solutions | https://www.nordson.com/en/divisions/efd/products/filling-systems?con=t&page=26
. Our Atlas filling system eliminates rework and overfills by providing accurate, repeatable fillings. Benefits Consistent fill weights Lightweight, portable design Easy setup, cleanup, and maintenance Atlas syringe filling systems provide a quick, easy way to transfer greases, silicones, and other
| http://etasmt.com/cc?ID=te_news_industry,24163&url=_print
compound’s formation and deposition not only is directly proportional to temperature, but also to the time length when temperature is over solder’s melting point
| https://unisoft-cim.com/fiducial-lineup-reference-points.html
be the XY origin 0,0 for the PCB. So for example, if you set the Reference 1 point on the top side of the PCB to be a fiducial point in the lower left corner of the PCB and that point is not currently the 0,0 XY origin for the PCB
| http://etasmt.com:9060/te_news_industry/2021-09-01/24163.chtml
compound’s formation and deposition not only is directly proportional to temperature, but also to the time length when temperature is over solder’s melting point
| http://etasmt.com/te_news_industry/2021-09-01/24163.chtml
compound’s formation and deposition not only is directly proportional to temperature, but also to the time length when temperature is over solder’s melting point
GPD Global | https://www.gpd-global.com/co_website/pdf/pump/PCD-Dispense-Technology.pdf
. PCD is ideally suited to low viscosity liquids such as fluxes, encapsulants, and underfills. Thicker fluids up to 60,000 cps such as greases, gasketing, and damming materials do not affect the performance of the valve
GPD Global | https://www.gpd-global.com/pdf/pump/PCD-Dispense-Technology.pdf
. PCD is ideally suited to low viscosity liquids such as fluxes, encapsulants, and underfills. Thicker fluids up to 60,000 cps such as greases, gasketing, and damming materials do not affect the performance of the valve
| https://www.eptac.com/the-5-essential-tools-for-soldering/
. Keep in mind that the solder should have a lower melting point than the materials that are being joined. This will allow the solder to melt first and bond the materials together