PCB Libraries, Inc. | https://www.pcblibraries.com/forum/topic536&OB=ASC.html
: In the Setup drafting options I changed the user preference for Silkscreen outline width to 0.2 mm, saved it and later in the BGA Wizard the previous
PCB Libraries, Inc. | https://www.pcblibraries.com/forum/ipc7351-and-smd-pad-shapes_topic2590.html
% control of the pad shape for every component family. You also control the percentage of the pad width to auto-generate the corner radius
PCB Libraries, Inc. | https://www.pcblibraries.com/forum/ipc7351-and-smd-pad-shapes_topic2590_page1.html
% control of the pad shape for every component family. You also control the percentage of the pad width to auto-generate the corner radius
PCB Libraries, Inc. | https://www.pcblibraries.com/forum/RSS_sod882d-package-dual-flat-with-lead_topic2477.xml
. recommended pattern. Library Expert allows you to see the Terminal Lead on the resulting pad so that you can make an educated judgement for the best soldering results.
PCB Libraries, Inc. | https://www.pcblibraries.com/Forum/topic2590&OB=ASC.html
% control of the pad shape for every component family. You also control the percentage of the pad width to auto-generate the corner radius
PCB Libraries, Inc. | https://www.pcblibraries.com/forum/topic2590&OB=ASC.html
% control of the pad shape for every component family. You also control the percentage of the pad width to auto-generate the corner radius
| https://www.eptac.com/ask/gullwing-lead-deformation/
. The 001 Handbook states on page 58, section 7.1.1 Lead Deformation: “After forming, component leads may be deformed up to 10% of the diameter, width, or thickness, and still be acceptable for use
| https://www.eptac.com/faqs/ask-helena-leo/ask/gullwing-lead-deformation
% of the diameter, width, or thickness of the lead, they cannot be used. The 001 Handbook states on page 58, section 7.1.1 Lead Deformation: “After forming, component leads may be deformed up to 10
PCB Libraries, Inc. | https://www.pcblibraries.com/Forum/the-pad-size-in-the-terminal-density-level-l_topic2949.html
. Now if the pad is generated as nominal width. we must rely on the courtyard to make sure the pad won't get connected with other, right
PCB Libraries, Inc. | https://www.pcblibraries.com/Forum/the-pad-size-in-the-terminal-density-level-l_topic2949_post11761.html
. Now if the pad is generated as nominal width. we must rely on the courtyard to make sure the pad won't get connected with other, right
.gif)
.jpg)
