Heller Industries Inc. | https://hellerindustries.com/fluxless-soldering/
? The chemistry involved with formic acid reflow is a two-step process: During the soak phase of a thermal profile (between ~ 150C and 200C), formic acid vapor is introduced into the process chamber where it reacts with the metal oxides on the solder and creates formate salts
ASYMTEK Products | Nordson Electronics Solutions | https://www.nordson.com/en/divisions/polymer-processing-systems/products/barrels/injection-barrels
B est corrosion resistant alloys in the industry for use in highly corrosive environments, acidic salts, material with flame retardants
ASYMTEK Products | Nordson Electronics Solutions | https://www.nordson.com/en/divisions/polymer-processing-systems/products/barrels/extrusion-barrels
production for molders Increased productivity Xaloy X-306® One of the most corrosion resistant alloys in the industry for use in highly corrosive environments, acidic salts, material with flame retardants, blowing agents, PVDF Features
ASYMTEK Products | Nordson Electronics Solutions | https://www.nordson.com/en/divisions/efd/blog/102518-halogens-and-halides
). Halides are chemical compounds that contain halogens. Halides are present in nature with some — namely salts and acids — being essential to human life
GPD Global | https://www.gpd-global.com/co_website/pdf/pump/Phosphors-LED.pdf
. Making phosphors Phosphors are made by high temperature solid-state reactions. Usually, finely ground inorganic salts of various elements are thoroughly mixed in stoichiometric proportions, before this concoction is heated to temperatures that may exceed 1000 ˚C
GPD Global | https://www.gpd-global.com/pdf/pump/Phosphors-LED.pdf
. Making phosphors Phosphors are made by high temperature solid-state reactions. Usually, finely ground inorganic salts of various elements are thoroughly mixed in stoichiometric proportions, before this concoction is heated to temperatures that may exceed 1000 ˚C
Heller Industries Inc. | https://hellerindustries.com/wp-content/uploads/2022/06/Optimizing-Reflowed-Solder-TIM-sTIMs-Processes-for-Emerging-Heterogeneous.pdf
fixtured lid seal cure. The curing step fixes the degree of compression on the solder TIM. Fig. 6: CSAM of Good sTIM after Reflow In the reflow oven, the flux is activated (reacts with metal oxides to form salts) during preheating (below 150°C). This preheat
1 |