Used SMT Equipment | Pick and Place/Feeders
Performance One-Side Operation The single-cantilever, single-rail structure optimizes the production area and manpower efficiency of equipment that uses only one side of the machine Flexible Production Capable of handling long substrates up to 1,50
Used SMT Equipment | Soldering - Reflow
Reflow welding machine is a very important equipment in SMT production process. Reflow welding process directly affects the quality of SMT process. It is difficult to achieve good reflow welding quality without a good reflow A welding machine. [1]
Used SMT Equipment | Chipshooters / Chip Mounters
Chip 90,000CPH (0.040Sec. / chip / Optimum）66,000CPH (IPC9850) 0402mm(01005 inch) ~ 33.5mm×33.5mm Laser recognition : ±0.05mm(±3σ) On-the-fly centering using integrated laser 2 stations, 4 gantries, 4 placement heads, 24 nozzles Linear servo mot
Used SMT Equipment | Pick and Place/Feeders
Parameter■ Speed : 92,000 CPH (Optimum, HS10 Head) ■ Structure : 2 Gantry x 10 Spindles/Head ■ Accuracy : ±28μm Cpk≥1.0 (03015 Chip) ±25μm Cpk≥1.0 (IC) ■ Parts Size : 03015 ~ 12mm, H10mm ■ PCB Size : 50 x 40 ~ 510 x 460mm (Standard) ~ 740 x 460mm (
Used SMT Equipment | Pick and Place/Feeders
Parameter■ Speed : 92,000 CPH (Optimum, HS10 Head) ■ Structure : 2 Gantry x 10 Spindles/Head ■ Accuracy : ±28μm Cpk≥1.0 (03015 Chip) ±25μm Cpk≥1.0 (IC) ■ Parts Size : 03015 ~ 12mm, H10mm ■ PCB Size : 50 x 40 ~ 510 x 460mm (Standard) ~ 740 x 460mm (
Used SMT Equipment | Pick and Place/Feeders
Parameter■ Speed : 92,000 CPH (Optimum, HS10 Head) ■ Structure : 2 Gantry x 10 Spindles/Head ■ Accuracy : ±28μm Cpk≥1.0 (03015 Chip) ±25μm Cpk≥1.0 (IC) ■ Parts Size : 03015 ~ 12mm, H10mm ■ PCB Size : 50 x 40 ~ 510 x 460mm (Standard) ~ 740 x 460mm (
Used SMT Equipment | Pick and Place/Feeders
Parameter■ Speed : 92,000 CPH (Optimum, HS10 Head) ■ Structure : 2 Gantry x 10 Spindles/Head ■ Accuracy : ±28μm Cpk≥1.0 (03015 Chip) ±25μm Cpk≥1.0 (IC) ■ Parts Size : 03015 ~ 12mm, H10mm ■ PCB Size : 50 x 40 ~ 510 x 460mm (Standard) ~ 740 x 460mm (
.JPG)
Used SMT Equipment | Pick and Place/Feeders
Yamaha YSM10 Pick And Place Machine Features: YSM series entry model mounter that achieved both the world’s fastest speed and versatility in its class worldwide! Ultimate basic machine featuring the three “1
Used SMT Equipment | General Purpose Test & Measurement
9 GHz and an integrated amplifier extends the application of the reference receiver to an O/E converter to analyze optical signals in combination with an electrical spectrum analyzer or oscilloscope. Benefits Full compilance to IEEE 802.3ae-LR, -E
Used SMT Equipment | Soldering - Reflow
T3A Conveyor Hot-air Reflow Oven Conveyor Hot-air Reflow Oven has four (4) heating zones and (300mm) wide and (1900mm) long conveyor for low to medium volume production runs. T3A utilizes PID intelligent micro-computer automatic temperature co
