Used SMT Equipment | Soldering - Selective
• Less then 100 hours • Stand-alone Machine • 2 Spray Nozzles/Programable • Dual Solder pots / Dual Heads – Loaded with SAC305 • Heads can run 4 different assembles • Pot level detection / Upgraded self-feeder • Automatic solder refill / Autom
Used SMT Equipment | Soldering - Wave
Vintage: 2000 (preferably higher) Solder pot: lead-free (preferably SAC 305 solder) Fingers: heavy duty fingers
Used SMT Equipment | Soldering Equipment/Fluxes
In-line Selective Solder S/N : 0611830601 Description: * Two Pots: SAC305 PB-Free * Includes Gas Nitrogen circuit * 3x400 V 33 kVA 50/60Hz * 410mm x 410mm Standard Gripper * Preheater with 12 IR Elements * Gantry robot fluxer (with flux m
Used SMT Equipment | Board Cleaners
Aqueous Tech Trident 111 Must sell posted 5/5/15 208V 3 phase 40 Amps Year 2008 Trident III is capable of removing all flux residues including rosin, no-clean and water soluble. Both lead and lead-free flux residues may be removed using the
Used SMT Equipment | Soldering - Reflow
BTU Pyramax 125N Parameters Pyramax Specifications Model Pyramax 125N Atmosphere Air or Nitrogen Conveyor Speed 10-60 in/min 25-152 cm/min Conveyor Width 2-18 in 51-457 mm Heated Length 125 in 3175 mm Heated Zones&
Used SMT Equipment | Soldering - Reflow
Configuration: ● edge/mesh ● Dual Air cooling zones ● left to right transfer ● chain oilers ● SMEMA VERSATILE, DURABLE, HIGH-PERFORMANCE REFLOW AT A VERY COMPETITIVE PRICE The Bravo 8105 is a forced convection reflow oven with eight top an
Used SMT Equipment | SMT Equipment
Features: 1. Heating system 1.1 Independent heating models are located with top and bottom with single hot air circulation in each zone. 1.2 All the heating zones are controlled by PLC through PLD, 1.3 Each zone is heated step by step, thus reducin
Used SMT Equipment | Soldering - Reflow
The SMRO-4000 Scirocco Reflow oven has been developed for reflow soldering of Hybrid boards, SMT boards and Curing Glue or thin film pastes. The machine is developed for medium to large series of assembly. The Scirocco is based on hot air convection.
Used SMT Equipment | Soldering - Reflow
The SMRO-4000 Scirocco Reflow oven has been developed for reflow soldering of Hybrid boards, SMT boards and Curing Glue or thin film pastes. The machine is developed for medium to large series of assembly. The Scirocco is based on hot air convection.
Used SMT Equipment | Soldering - Reflow
The SMRO-4000 Scirocco Reflow oven has been developed for reflow soldering of Hybrid boards, SMT boards and Curing Glue or thin film pastes. The machine is developed for medium to large series of assembly. The Scirocco is based on hot air convection.
.gif)
