Industry News | 2016-05-10 14:16:16.0
GPD Global offers individual pumps for integration into your existing platform – the Jetting NCM5000 Pump is one of them. The Jetting NCM5000 Pump simplifies jetting to its basic elements: hammer, pin, and nozzle. Only the pin and nozzle are wetted parts. This means easy set-up, cleaning, and upkeep.
Industry News | 2003-04-01 08:40:24.0
Using environmentally safe solvents these machines offer two-stage, multiple-frequency ultrasonic cleaning, rinsing and drying for pcb defluxing, cleaning of precision parts and metal degreasing.
Industry News | 2022-02-17 12:52:30.0
Cleanly and easily separate a row of up to 10 tabs without dust. Singulating tab routed printed circuit cards in low to medium volume production quantities is safe and easy with the N115 Nibbler from FKN Systek. Two sharp support blades on either side of the tab help cleanly slice the PCBs from the tabs.
Industry News | 2023-10-11 18:59:11.0
The N200 punch cleanly separates round and odd shaped panels without dust. Available for under $5,000 from FKN Systek, The N200 is a low cost top down air operated punch for singulating tab routed PCB Panels one tab at a time. This tool will cleanly separate FR4 or Metal Core PCBs . An upper and lower matching knife blade is used to pinch the tabs apart. ( for aluminum panels the blades are set to shear).
Industry News | 2022-09-21 08:26:26.0
Cut up to 10 Tabs in one Stroke
Industry News | 2016-11-17 15:22:21.0
The N200 punch cleanly separates round and odd shaped panels without dust. Available for under $4,000 from FKN Systek, The N200 is a low cost top down air operated punch for singulating tab routed PCB Panels one tab at a time. An upper and lower matching knife blade is used to pinch the tabs apart.
Industry News | 2019-09-06 14:46:04.0
THREE BLADE CHOICES FOR SINGULATING RECTANGULAR TAB ROUTED PCBS CLEANLY SINGULATE STANDARD AND FLEX CIRCUIT PANELS WITHOUT DUST Cleanly
Industry News | 2023-10-04 16:22:35.0
Re-sharpening blades is one way to get the most mileage out your equipment
Industry News | 2023-09-20 14:28:04.0
Separating skip scored V-Scored PCB panels up to 48" long is made simple and easy with the K4000 PCB depanelizer from FKN Systek. Just place the bottom scoreline of the PCB onto the linear blade and step on a guarded foot switch to bring the circular blade across the top scoreline for clean separation of the PCB panels. Right and left blade guards assure operator safety. The front and back support and take up table are height adjustable.
Industry News | 2017-01-25 16:39:34.0
Singulating tab routed printed circuit cards in low to medium volume production quantities is safe and easy with the N100 Nibbler from FKN Systek. Blades are available in standard thicknesses of .120”, .093” and .062”. Custom sizes to match the width of the routed section can be ground. Tabs are cut cleanly on each side so that no further clean up is required to remove excess material, as is often the case when using hand tools or when breaking the panels manually. In addition, since only one tab is cut at a time, minimal stress is imparted to the board during the process as the panel is not pressed between two points during the cut.