Industry News | 2016-05-10 14:16:16.0
GPD Global offers individual pumps for integration into your existing platform – the Jetting NCM5000 Pump is one of them. The Jetting NCM5000 Pump simplifies jetting to its basic elements: hammer, pin, and nozzle. Only the pin and nozzle are wetted parts. This means easy set-up, cleaning, and upkeep.
Industry News | 2018-10-08 20:18:03.0
GPD Global will exhibit at the upcoming SMTA International 2018. At booth# 517, see our automated Conformal Coating Machine with excellent repeatability for under $40,000.
Industry News | 2008-07-24 17:41:10.0
Asymtek introduces its new DispenseJet DJ-9500 fluid jetting valve for high-speed underfill applications and jetting silicone for LEDs.
Industry News | 2018-03-22 21:11:24.0
Nordson ASYMTEK introduces the new Helios™ SD-960 Series Automated Dispensing System for medium and bulk volume deposits of single- (1K) and two-component (2K) materials in electronics manufacturing and printed circuit board assembly. The Helios system is ideal to deposit volumes greater than 1cc, and line widths and dots that exceed 1mm, but it can deposit volumes down to 0.3cc and line widths as narrow as 0.3mm. The system supports highly abrasive thermal interface materials (TIM), silicones, epoxies, and grease for applications such as potting, sealing, gasketing, and structural adhesives.
Industry News | 2020-01-23 17:30:46.0
ASYMTEK brings its latest fluid dispensing and conformal coating solutions to IPC APEX EXPO, San Diego, CA, in booth 1611. New at IPC APEX is the ASYMTEK Vortik™ family of progressive cavity pumps (PCP), with the smallest depositions possible on the market today. The VPs, VPm, and VPg pumps rely on positive displacement to provide continuous needle dispensing of one- and two-component fluids with high-volumetric accuracy, increased reliability, and reduced cycle time. At 0.2 microliters per second, the Vortik VPs offers the lowest flowrate and smallest depositions possible across all PCP pumps available in the market today - delivering precise control of narrow lines and small shots for two-component mixed fluids.
Industry News | 2012-06-25 12:57:32.0
New extension for Paraquda SMD placement machine released A new precision dispenser option allows the Paraquda high-speed pick-and-place from Essemtec to dispense up to 20,000 glue or paste dots per hour.
Industry News | 2021-12-21 14:53:11.0
PVA today announced plans to exhibit at the 2022 IPC APEX EXPO, scheduled to take place Jan. 25-27, 2022 at the San Diego Convention Center in California. The team will showcase four systems in Booth #2301, including the Delta 8 Selective Conformal Coating Machine with the new Valve Tool Changer and 5th Axis Motorized Tilt. Additionally, a Delta 8 Coating/Dispensing System will be equipped with a PDP Progressive Cavity Dual Pump with Fiducial Camera and Needle Calibration, another Delta 8 Coating/Dispensing System will be on display with the MR1 Metered Piston Dispenser, and the Sigma Benchtop Robot will be shown with the FCS300 Spray Valve and FCM100 Front Closing Micro Dispense Valve.
Industry News | 2013-09-14 09:00:12.0
Essemtec will exhibit in booth #827 at the upcoming SMTA International Exhibition, scheduled to take place October 15-16, 2013 at the Fort Worth Convention Center in Texas.
Industry News | 2021-05-19 22:36:33.0
Calibration is the process of configuring an instrument to provide a result for a sample within an acceptable range. This process eliminated or minimized factors that cause inaccurate measurements. Although the exact procedure may vary from product to product, the calibration process generally involves using calibration instrument to test samples of one or more known values called "calibrators". The results are then used to establish a relationship between the measurement technique used by the instrument and the known values. The process in essence "teaches" the instrument to produce results that are more accurate than those that occur otherwise. The instrument can then provide more accurate results when samples of unknown values are tested in the normal usage of the product.
Industry News | 2024-09-23 20:20:27.0
PVA is excited to announce its participation in The ASSEMBLY Show, scheduled to take place October 22-24, 2024 at the Donald E. Stephens Convention Center in Rosemont, IL. PVA will be exhibiting in Booth 1706, where attendees can explore the latest advancements in conformal coating, dispensing robotics and manual systems.
.gif)
winsouce.jpg)