Industry News | 2020-09-28 22:54:44.0
Compared with other international lithium battery standards, the temperature cycling conditions specified in the UN38.3 standard are more demanding and longer.
Industry News | 2021-12-17 20:20:03.0
As we know, the operation of the internal compression structure of the refrigeration compressor has a fixed direction. First of all, we should make it clear that the reverse rotation of the compressor is adverse. Scroll refrigeration compressors can only compress in one direction of rotation. Single-phase compressors always start and run in the correct direction, except in the case of instantaneous power failure. The direction of rotation of the three-phase compressor is determined by the phase sequence of the power supply, so there is a chance that the compressor will rotate reversely.
Industry News | 2012-08-10 07:21:19.0
Krayden, Inc. (krayden.com) will showcase leading suppliers’ technologies in Booth #845 at the upcoming Solar Power International (SPI) exhibition, scheduled to take place September 10-13, 2012 at the Orange County Convention Center in Orlando, FL.
Industry News | 2020-12-22 12:29:59.0
New Yorker Electronics unveils new Exxelia High Temperature Film Capacitor Series Operating up to 200°C
Industry News | 2021-06-02 23:05:16.0
The traditional method of starting an AC induction motor "across the line" results in full voltage, current, and torque being applied immediately when the motor is started, and likewise, being removed immediately when the motor is stopped. While this is the most simple starting method, the high inrush current (often 6 to 7 times the motor's rated current) and peak starting torque can damage the motor, driven equipment, and product. Across the line starting also causes high peak power demand, which can trigger peak demand fees from the utility company. A soft starter can eliminate these problems by gradually increasing voltage to the motor terminals during startup, providing a controlled ramp-up to full speed. This lowers inrush current and controls starting torque, reducing mechanical shocks to the system and the product.
Industry News | 2023-10-09 09:18:52.0
Indium Corporation Junior Application Engineer Siegfried Lorenz will present at the 2023 LED Meets SMT forum on October 25 in Leinfelden-Echterdingen. The forum, featuring innovative presentations by partners from across the industry, focuses on the processing of LEDs in electronics manufacturing.
Industry News | 2021-01-05 10:53:32.0
New Yorker Electronics Releases new Exxelia 560P High-Temp Capacitors with Longer Lifetime and Operating Temperatures to 180°C
Industry News | 2021-05-31 23:41:56.0
The network allows instant communication with people throughout the world. Wit network, files, data and information can be easily shared. This can be very beneficial for large organisations to maintain their data in organized manner.
Industry News | 2021-05-19 22:36:33.0
Calibration is the process of configuring an instrument to provide a result for a sample within an acceptable range. This process eliminated or minimized factors that cause inaccurate measurements. Although the exact procedure may vary from product to product, the calibration process generally involves using calibration instrument to test samples of one or more known values called "calibrators". The results are then used to establish a relationship between the measurement technique used by the instrument and the known values. The process in essence "teaches" the instrument to produce results that are more accurate than those that occur otherwise. The instrument can then provide more accurate results when samples of unknown values are tested in the normal usage of the product.
| 1 |
