Parts & Supplies | Pick and Place/Feeders
Yamah YV100 II parameter 1. Highways based on the reliability of basic structures 2. Paste of protective elements 3.0.25 seconds / CHIP high-speed mount 4. Can mount 0.5 foot spacing 32mm QFP 5. High Speed Image Processing 6.2 cameras reduced p
Parts & Supplies | Pick and Place/Feeders
NXT nozzle NXT-H01-7.0G (AA07300/AA07310) Spare Name: AA07300 AA07310 NXT-H01-7.0G Specifications Model: NXT NOZZLE Head H01 Dia 7.0G. FUJI NXT H01 PICK UP NOZZLE ¢ Applicable models: FUJI NXT H01 AA0AS00 FUJI NXT H01 1.0 AA05800 F
Parts & Supplies | Pick and Place/Feeders
NXT nozzle NXT-H01-H02-1.3 (AA06812/AA06800) Spare Name: AA06812 AA06800 NXT-H01-H02-1.3 Specification: NXT NOZZLE Head H01 & H02 Dia. 1.3 FUJI NXT H01 PICK UP NOZZLE ¢ Applicable models: FUJI NXT H01 AA0AS00 FUJI NXT H01 1.0 AA05800
Parts & Supplies | Pick and Place/Feeders
NXT NOZZLE-10.0-NXT_1 (YZ0060) Spare Name: YZ0060 Specifications Model: NOZZLE-10.0-NXT_1 FUJI NXT H01 PICK UP NOZZLE ¢ Applicable models: FUJI NXT H01 AA0AS00 FUJI NXT H01 1.0 AA05800 FUJI NXT H01 1.3 AA0MZ00 FUJI NXT H01 1.3M AA06900 F
Parts & Supplies | Repair/Rework
. This machine adopts industrial computer control, full automatic vision alignment system can acquire BGA and the PCB image through the CCD camera and collect them on the image positioning processing system, calculate the offset position and angle th
Parts & Supplies | Repair/Rework
Three independent heaters control systems. FG-P6000 is available heating portion of the PCB board by hot-air circulate both from top and bottom at the same time. With large IR bottom heating, it can completely avoid PCB deformation during reworking
Parts & Supplies | Repair/Rework
PG-P6860 Main Features： 1、 The top heater can move freely along the X, Y axis in the IR preheating area. It is good for many BGA chips distribution at different positions in the PCB board which need repair. X-shaped infrared laser can do rapid lo
Parts & Supplies | Repair/Rework
PG-P6800 Main Features： 1、There are 3 independent heaters. The 1st and 2nd hot-air heaters can control multiple groups and segments temperature parameters. The 2nd heater can move up and down. The 3rd large area IR heater can preheat the PCB boar
| 1 |
.gif)
.gif)
