Electronics Forum | Thu Oct 24 03:03:13 EDT 2002 | harriss
Hi: The component height will increase on the PCB after reflow soldering. But i don't know the accurate data of the increased height. Who can help me to get it? The stencil thickness is 5 mil we used. Thanks Harriss
Electronics Forum | Sun Mar 09 19:03:48 EST 2003 | Dean
For the reflow process check out KIC THERMAL at kicthermal.com. They make a product called 24/7 which can collects data for process capability. I beta tested the unit about 2 years ago....interesting stuff.
Electronics Forum | Mon Feb 03 10:03:30 EST 2003 | ksfacinelli
What are people using for re-vacuum sealing of opened parts. The parts of coarse would be baked out prior to sealing. The system should be ESD compliant. Need some help, Kevin
Electronics Forum | Mon Mar 03 10:53:24 EST 2003 | MA/NY DDave
Hey Thanks, Thanks thus far for the other solutions, comments, floor experience, and the web links. YiEng MA/NY DDave
Electronics Forum | Mon Mar 03 08:04:57 EST 2003 | bphillips
0201 chip placement has been very challenging, how can I validate my chip shooter's quality performance with this size chip?
Electronics Forum | Mon Mar 03 08:43:51 EST 2003 | markt
I can't seem to improve my machine utilization rate above 85%, what can I do to increase productivity on my placement machines?
Electronics Forum | Mon Mar 03 09:27:19 EST 2003 | floydl
With regard to measuring dot diameter on my dispensers, is there an easier way to calculate the Cp and Cpk values? This manual data crunching is for the birds!
Electronics Forum | Mon Mar 03 10:49:12 EST 2003 | davef
Look here: http://www.smtnet.com/Forums/index.cfm?fuseaction=view_thread&CFApp=1&Thread_ID=5943&mc=2
Electronics Forum | Mon Mar 03 10:33:24 EST 2003 | Ben
We have a customer that is requesting decoupling capacitors, and we are not sure what they are or where to buy them. I know that the customer wants ceramic decaps. Should we just look for multi-layer ceramic capacitors with the rating the customer
Electronics Forum | Mon Mar 03 10:38:44 EST 2003 | cman
In a short time, I will be manufacturing a mixed board. On the primary side, I have through hole and SMT combination. On the secondary side, I have SMT only. I produced Through hole and SMT in the past, but not in the same board. What is the be
