Electronics Forum | Wed May 22 03:26:41 EDT 2019 | itrueriko
hi matt, we have our customized vision system to check all the chip components, and is specialized for this. Do try understand the system and you will know it. Do email to me i will send some sample and profile to you. itrueriko@gmail.com Thanks
Electronics Forum | Wed May 22 02:03:36 EDT 2019 | bukas
what software are you using? do you need a gerber or component library file? what is the component?
Electronics Forum | Mon Jun 03 15:10:48 EDT 2019 | emeto
Page 43 in the datasheet is giving you all detail how the stencil should look like...if this is what you need to do. Page 42-43 shows the geometry of the part and recommended land pattern for the PCB ...if this is what you need.
Electronics Forum | Fri May 24 03:24:14 EDT 2019 | weglimir
Thank you! it is the same on other slots as well, when I removed the board, error was the same, but it appeared instantly after DEK Program was loaded. When it is inserted - this error appears after 10 seconds (approximately) so it seems like somethi
Electronics Forum | Mon Jun 03 13:01:59 EDT 2019 | slthomas
Is there any chance that the boards were mechanically stressed (for instance, installed in a fixture) before, during, or after the testing? I'm just looking for other possible root causes.
Electronics Forum | Mon Jun 10 13:37:03 EDT 2019 | slthomas
How wide is this board? I ask because if it's not terribly wide, you might just be better off attacking the problem with the profile rather than attacking the board conveyor design.
Electronics Forum | Fri Jun 21 03:33:54 EDT 2019 | romford_navy
It’s now working correctly Had to re-load MMI software to get new System Files
Electronics Forum | Thu Jun 27 08:08:03 EDT 2019 | SMTA-John
Would a sealed cabinet injected with nitrogen which has also passed through dessicant provide ideal storage ? ..dry and little oxygen..
Electronics Forum | Wed Jul 03 07:49:35 EDT 2019 | daniel_marquette
Got it. Servo tuning is new to us, so we'll try it. When you propose to swap the Y axis amps, do you refer to the driver that controls the Y motors? Thanks,
Electronics Forum | Tue Jul 16 03:58:40 EDT 2019 | artem
Hello, what is the difference between the TP9-2 and the TP11-UFP? The TP11-UFP is larger, can it do something more than the TP9-2 except placing more components?