Electronics Forum: 0603 and paper (Page 1 of 20)

Re: WAVE SOLDERING and Gluing 0603 packages

Electronics Forum | Sun Apr 25 12:05:50 EDT 1999 | Chrys Shea

Has anyone had trouble waving and gluing 0603 R's and C's? At my company, our designers have "opened the floodgates" on bottom-side 0603's. We've got an EPK+ with rotary chip and omega wave but can't seem to get skip-free solderin

Re: WAVE SOLDERING and Gluing 0603 packages

Electronics Forum | Mon Apr 26 09:18:27 EDT 1999 | C.K.

Has anyone had trouble waving and gluing 0603 R's and C's? At my company, our designers have "opened the floodgates" on bottom-side 0603's. We've got an EPK+ with rotary chip and omega wave but can't seem to get skip-free so

paper vs emboss (& zig zag placement)

Electronics Forum | Tue Oct 02 10:30:10 EDT 2012 | eniac

Difference in pick height from paper and embossed reel (typically) is 0.2 mm. Try to change your pick height and place height (different type of capacitors have a different height: for 100 nF 0603 and for 4.7 uF 0603 it's a big difference!). Can you

paper vs emboss (& zig zag placement)

Electronics Forum | Thu Sep 27 15:09:24 EDT 2012 | ericrr

I notice that someone has set all the capacitors & resistors parts as emboss instead of paper tape. Does this make any difference to the pick and placement of the parts, By the way recently we changed from 1206 to 0603 parts, coming out of the mac

paper vs emboss (& zig zag placement)

Electronics Forum | Tue Oct 02 13:55:12 EDT 2012 | ericrr

OK I can take a hint when asked for a photo. I did not try to take a photo as I thought the close up image would put the picture out of focus, so this is where a bit of graphics works might help explain the problem. When I had a look at the 1206 p

WAVE SOLDERING and Gluing 0603 packages

Electronics Forum | Fri Apr 23 14:19:39 EDT 1999 | C.K.

Has anyone had trouble waving and gluing 0603 R's and C's? At my company, our designers have "opened the floodgates" on bottom-side 0603's. We've got an EPK+ with rotary chip and omega wave but can't seem to get skip-free soldering on these guys.

Re: WAVE SOLDERING and Gluing 0603 packages

Electronics Forum | Sat Apr 24 08:23:03 EDT 1999 | Bubba

Surprisingly enough, ever since the addition of an omega wave, we solder those often-troublesome SOT23's just fine and dandy.. anyways, long-term, well be getting a universal GDM which uses positive displacement pumps..currently we're using fuji g

Re: WAVE SOLDERING and Gluing 0603 packages

Electronics Forum | Fri Apr 23 14:59:14 EDT 1999 | Chrys Shea

Has anyone had trouble waving and gluing 0603 R's and C's? At my company, our designers have "opened the floodgates" on bottom-side 0603's. We've got an EPK+ with rotary chip and omega wave but can't seem to get skip-free soldering on these g

Re: WAVE SOLDERING and Gluing 0603 packages

Electronics Forum | Fri Apr 23 15:04:44 EDT 1999 | M.T.

Has anyone had trouble waving and gluing 0603 R's and C's? At my company, our designers have "opened the floodgates" on bottom-side 0603's. We've got an EPK+ with rotary chip and omega wave but can't seem to get skip-free soldering on t

Re: WAVE SOLDERING and Gluing 0603 packages

Electronics Forum | Sat Apr 24 04:41:56 EDT 1999 | Murray Pulman

Dear C.K We are routinely wave soldering 0603 and sot23 on subcontract, hence we get what we are given!!. Being UK based we use a Blundell cms 400 dual wave soldering machine (made in Coventry), Tecan Stencils and Loctite 3612 adhesive. You must k

  1 2 3 4 5 6 7 8 9 10 Next

0603 and paper searches for Companies, Equipment, Machines, Suppliers & Information

SMT feeders

Repair tools for all your electronic circuit board repair needs.
Panasonic CM402, CM602, DT401

Easily dispense fine pitch components with ±25µm positioning accuracy.
Electronics Decoating Agent

Best Reflow Oven