Electronics Forum | Sat Feb 19 11:40:40 EST 2011 | ravo
Hi everybody, I am here seeking your experience and asking your help, I want to update our SMT production line as I already hace FUJI CP6 and QP242 machines beside GL2 and oven our new product including 60 components 0402 (1mm*0.5mm ) and 2 BGAs w
Electronics Forum | Tue Sep 06 12:39:06 EDT 2011 | deanm
According to IPC-7351A, the optimum fiducial is a solid circle with a minimum of 1mm diameter, but can be up to 3mm. There should be a solder mask clearance a minimum of 2x the radius of the copper circle. So the minimum fiducial size is 0.040" with
Electronics Forum | Mon Apr 29 13:56:19 EDT 2013 | williamaxler
We have a Versaflow 40/50 and ours is setup like this. We have out nozzle test position set so that in the Z axis you are 3.8mm away from the pin. Used feeler gauge Then you can set your gradient per nozzle. Start with a number then do a wave offs
Electronics Forum | Wed Jul 03 10:37:41 EDT 2013 | sara_pcb
My circuit board contains 11 x 11 matrix 1mm pitch BGA, The device was tested in socket on evaluation Board. We handed over the actual PCB & devices for re-flow. The assembly house first re-flowed all the SMT components other than BGA. BGA was placed
Electronics Forum | Mon Nov 11 08:47:00 EST 2013 | mleber
Thanks guys. Here are more details. The cards are essentially the same. They use the same connectors, same footprint, the traces / layers would be comparable etc. The difference between the 2 we see is that one is laminate - Rigid Metal Clad Base, Ty
Electronics Forum | Mon Mar 24 20:30:01 EDT 2014 | davef
The "correct" answer is: Use the tests and methods that you used to qualify your solder paste in the first place. That sounds good but might not be all that practical for practicing assembly-types. Here's something that's not as good, but will give
Electronics Forum | Fri Mar 28 00:13:29 EDT 2014 | jmelson
I was hoping somebody knew how to do this. My method was to place parts at 0 and 180 degree rotation, and adjust head offset until the parts were in the same position at both rotations. Then, I adjusted the M.A. station offset to zero in on correct
Electronics Forum | Mon Sep 15 23:59:09 EDT 2014 | marcelorotofrance
Hi evreybody I wish to know if somebody can describe how is made a "Calibration Slug" for centering the upward camera of a QUAD IVC machine. The instruction manual mentions a slug that is attached with vacuum to the "Vision Nozzle" and there is some
Electronics Forum | Tue Jul 05 17:09:40 EDT 2022 | madisreivik
PROBLEM SOLVED :) ! I messed with parameters, then started to check hardware again. and.... There are 2 transport position on the carrier 1) vacuum 2) mech clamp Both have fiber position sensor which shows the status When there is component, the
Electronics Forum | Sat Sep 02 15:54:46 EDT 2023 | mekmat544
Hello, I would like to ask you for help. We have problem with our Selective Solder System SEHO PowerSelective. Problem is, that Z axis is decreasing. When we start soldering, height of Z axis is correct but after each solder cycle, there is decreasin