Electronics Forum | Tue Oct 17 13:37:54 EDT 2000 | dpoling
We have this same model and are very disappointed with it. It has several issues that we do not like: 1. The solder feeder has never worked properly. 2. The fingers are very soft material and bend easily. 3. There is no way within the machine to adj
Electronics Forum | Mon Oct 16 11:10:51 EDT 2000 | PeteC
Excessive bridging on SOICW-20, -16, SOIC-8, -14,-16. I've got a board, 4" x 6" w/ SOICs on bottom-side for wave solder. I've checked topside board temp for flux activation, wave height, wave surface with the glass check-plate going from 1" to 2" spa
Electronics Forum | Thu Oct 19 00:54:26 EDT 2000 | PeteC
Top side temp. is 97C before the wave. No, we don't have the IR lamp on; we did try it though with no positive change. Solder alloy Multicore 63/37 Other boards run better. This one is the worse. We have not had good success eliminating bridges on SM
Electronics Forum | Mon Oct 16 20:45:45 EDT 2000 | Dave F
Thanks Nance. So, your production process is: * Screen / dispense glue on secondary side * Place secondary side SMT components * Cure glue * Insert primary side PTH components * Wave secondary side Please tell us about: * Flux type and wave s
Electronics Forum | Fri Oct 06 10:19:21 EDT 2000 | JAX
Head, There are no rules on what is placed by machine. Some things to look at: 1. vision alignment issues a. board size ( FOV ) 2. Machine pick-up a. special nozzle b. off center pick-up (depending on machine this could cause a problem) 3. Re
Electronics Forum | Fri Oct 06 08:48:11 EDT 2000 | CAL
NJEV- You can contact me off line for my opinion on the Easi line :caldon@smtnet.com. Compared to past products this one was weak. Missing parts, Screws sticking out, the thermo-sensor was right next to the button so the longer you held the button th
Electronics Forum | Tue Sep 26 20:19:51 EDT 2000 | Dave F
Never heard of N-Tech. Whose material do they use? Two common materials are: Imidazole (Via Systems) and Entek (Enthone) OSP is a lacquer that fabs apply to boards by either spraying or dipping. What thickness control does your fab use? For inst
Electronics Forum | Tue Sep 26 11:03:00 EDT 2000 | Wolfgang Busko
Greg: You might look for : - smallest board size - largest board size - finest pitch you are able to handle (safe) - Parts/hour - units/hour (If you find your bottleneck it will be easy to determine) - number and kind of feeders, components per line
Electronics Forum | Wed Sep 20 22:19:06 EDT 2000 | Herman Koo
I am operating MPM AP HiE. The squeegee was just repaced with metal blade, side plastic deflectors(with spring) at both ends. The engineering dept suggested that we level the squeegee with the plastic deflector up. Afterwards, we loosen the screw and
Electronics Forum | Sat Nov 18 09:37:10 EST 2000 | Franco Dav�
CSM toolbox & CSM digitizer are two hold software for programming the machine offline. If you want something thery new you have to ask via PHILIPS EMT ( at your PHILIPS EMT region ) the CAD2CAD software. This software is for free for PHILIPS custome
winsouce.jpg)
.png)