Electronics Forum | Fri Apr 21 03:20:04 EDT 2006 | kent_peterson
I think your refering to the sleeve. It is held in with loctite 262 or something. You can set up a bearing puller with a socket to pull it out around station 2-3. Fuji will drop the whole gear out to do this. Too much for a few sleeves.
Electronics Forum | Thu Aug 31 16:06:26 EDT 2006 | GS
I rember time ago, the EIA-481 (1-2-3) and recntly may be EIA-200 ? sorry I anm not sure. Best Regards.........GS
Electronics Forum | Thu Oct 05 16:06:33 EDT 2006 | cw
Thanks! What's your ramp rate?2 - 3C/sec? What's your time above 217C. What's your peak temp?
Electronics Forum | Fri Jan 19 02:03:09 EST 2007 | lococost
As a sidenote, if nothing of the above works, IPC 610 states that it is accetable (class 1,2,3) for solder to touch a SOT body if it is plastic.
Electronics Forum | Tue Jan 23 17:48:17 EST 2007 | GS
for SMDs, try to look for EIA-481.1.2.3, or may be the new version EIA-200 if I am not wrong. Also IEC 60286-2 (leaded components like axials, radials,..) Regards......GS
Electronics Forum | Fri Feb 16 08:28:50 EST 2007 | pavel_murtishev
Good afternoon, Typical plating thickness for immersion tin is 0.6-1.0um. I do not know what the maximal thickness is. But plating is self-limiting process and I believe maximal thickness should be about 2-3um. BR, Pavel
Electronics Forum | Thu Jul 26 08:39:16 EDT 2007 | d0min0
since 1999 we use Heraeus PD944, in time we tested Loctite also but had some issues with it - or with our machine specialist :)) we dispense with Fuji CP (2 , 3 & 4) it only creates problems when its on the solder pads ;-) best wishes
Electronics Forum | Wed Feb 06 17:28:27 EST 2008 | blnorman
We have some components on a reel that are 2.3 mm in thickness and need to be baked out. The reel has a warning not to exceed 50�C. According to J-STD-33, the proper bake out is 67 days @ 40�C.
Electronics Forum | Tue Mar 11 11:59:33 EDT 2008 | wrongway
we use loctite adhesive through our dj2000 valve 2-3 shifts a day 5 days a week I clean the entire valve out 1 every 2 weeks we take just the needle off and soak it between jobs
Electronics Forum | Thu Nov 20 04:00:36 EST 2008 | caerleon
Our sub-contractors will be using SMD600. Thankyou all for your replies much appriciated.
.gif)
