Electronics Forum | Tue Aug 24 03:36:19 EDT 2010 | naveed
Hi all!i m using yv100xg line,with vois application version 1.5R2000,when the mechine starts,after loading all files and returning to origin,a mesg appears ,that iz"Ea12324:the repair detection of the file.the mchne is unusually finished and it has t
Electronics Forum | Wed Oct 20 11:14:55 EDT 2010 | swag
I hope you're fixed by now but my advice is to pull all connectors from drivers and reseat. Also, reseat connectors in I/O area + I think there's some cards that relay power to various axis in this area. Reseat all connectors. From my experience,
Electronics Forum | Thu Jul 28 21:32:06 EDT 2011 | rway
We are using 2.7.7. I have two M1 systems, but the sw is the same. I am not at work at the moment, but I will look tomorrow and let you know. On a side note, the conveyor will run continuously when in bypass mode. It does sound like you have a tra
Electronics Forum | Tue Feb 26 09:32:56 EST 2013 | anton99
Update: We have bought more reels to cover both lines and it has helped enormously. There were about 100 part numbers that were used on both lines over 300 times per year. The majority of them were less than $20.00 a reel. We have also been using My
Electronics Forum | Wed Jul 04 16:40:56 EDT 2012 | comatose
We use a lot of single row breakaway pin headers. Right now we order then as sticks of 36 and I just have a tech break them into whatever lengths we need (3 pin, 5 pin, 8 pin, whatever.) I'm trying to streamline our auxillary processes. I know you ca
Electronics Forum | Thu Feb 21 08:20:43 EST 2013 | cowens
Thank you so much. We actually did get the machine up and running yesterday morning. We switched the theta and the transport driver cards and it is working now. We have had the connectors burn on us in the past and replaced them. I am hoping the prob
Electronics Forum | Wed May 21 15:13:56 EDT 2014 | wendynguyen234
Sarason, thank you very much for your support. There is an ISA interface board with just ribbon cable from window 95 PC to VME I/O DPRAM ver. 2 board in the same VME rack that has MVME-162-110 (CPU board), DSP, ADDA, AXIS & CONT boards. Do you think
Electronics Forum | Sat Jun 07 23:37:34 EDT 2014 | demzvill
Hello all Good morning. I just want to ask with you guys about the problem that we always experienced in our production. We could not get our target ppm due. to inverted placement of chip resistor. We are using 2000 series juki mounter and cf03hp j
Electronics Forum | Tue Nov 25 12:37:26 EST 2014 | charliedci
We're attempting to seriously address this problem now. For us it is not the cost of the lost components as much as the loss of SMT efficiency holding a job waiting for a $5.00 reel of components and the cost of $20.00 to overnight ship. Our IT gro
Electronics Forum | Wed Feb 11 10:57:48 EST 2015 | mbartel
I do a lot of prototyping, but I also do production boards. I produce 2000-5000 boards a month for an in house smt process. I feel this will increase do to the fact that our engineers are designing more with surface mount rather than through hole. S
