Electronics Forum | Fri Feb 15 01:44:15 EST 2008 | taimju
Hi, I have heard that some have added small amounts phosphorus to SAC alloy in wave soldering and this way decreased drossing. Does anyone experienced this with SN100C? Regards, Juha
Electronics Forum | Mon Feb 18 11:31:02 EST 2008 | davef
Print paste through the new stencil with a piece of mylar [or other clear plastic sheet about the thickness of paper] between the board and the stencil. Dispose of the mylar according to local practice after confirming proper aperturation of the sten
Electronics Forum | Mon Feb 18 13:17:18 EST 2008 | smtnet51
Why not just print a board? You have a spare board for your profile right? When you are done you have a working program and you know if the stencil is correct.
Electronics Forum | Wed Feb 20 14:38:51 EST 2008 | carln
We are in a situation where our parent company sends us stencils from Japan, but the Gerber is not sent. When we need a replacement stencil, we need to wait for Japan to send it. Can your stencilscan system reverse engineer the stencil and generate
Electronics Forum | Fri Feb 15 08:06:30 EST 2008 | davef
While you're waiting for others to reply, search the fine SMTnet Archives to find postings like this http://www.smtnet.com/forums/Index.cfm?CFApp=1&Message_ID=50177
Electronics Forum | Mon Feb 18 09:48:40 EST 2008 | lococost
Thank you Mr Fish and Operator. All these machines seem to be manually controlled though. At least it gives me an idea of what is in the market.
Electronics Forum | Fri Feb 15 15:09:24 EST 2008 | soudomphong
Anybody have any idea where to get the cutter motor for siplace 80-S20 with reasonable price? I am also looking for S20 head board, and a Y-axis motor. Any help would be much appreciated, thank you.
Electronics Forum | Mon Feb 18 07:57:38 EST 2008 | davef
Silver palladium is intended for adhesive applications. You need components with a nickel barrier. While you're waiting for others to reply, search the fine SMTnet Archives [ar and pd] to find postings like http://www.smtnet.com/forums/Index.cfm?CFAp
Electronics Forum | Wed Feb 20 16:55:52 EST 2008 | flipit
Pd/Ag doesn't usually dissolve (leach) nearly as bad as Ag only. In my hybrid days, we would use 62/36/2 solder. The 2% silver helps saturate the solder joint and thus keep the Ag from being leached away by the Sn.
Electronics Forum | Mon Feb 18 15:44:49 EST 2008 | ck_the_flip
Yup! All the major players out there - KIC, Datapaq, and ECD - are all capable of profiling both reflow and wave solder. check them out. www.kicthermal.com www.ecd.com www.datapaq.com