Electronics Forum | Thu Aug 14 16:36:45 EDT 2003 | Hussman
Anyone using these 2010 resistors? We just tried them and they bow like crazy during reflow. Not very good looking. Profile meets manufacturers spec. The part solders and works fine, but I'm a little concerned about putting anything on a board th
Electronics Forum | Mon May 23 09:28:26 EDT 2011 | alcatel
I need to stack 2 resistors size 2010 on one location. Ive heard that there is a chip like solder solid which could be placed on the solder pad connecting both chips with its height, but never got much detail about this. cant afford to be doing thi
Electronics Forum | Tue Feb 07 09:54:25 EST 2017 | rgduval
Are you having any issues with other ERJ series resistors from Panasonic? Any other 2010 resistors? There is, very likely, something specific to this part/package/packaging that is causing your problems. Things to check: -Identify where the issue
Electronics Forum | Mon Aug 30 08:08:30 EDT 2010 | sreid
Hello, I have been tasked with finding a solution to rework 242 boards that have 34 incorrect 0603 resistors placed. These resistors are placed throughout the board and are surrounded by other SMT components. If anyone can advise me on a more time
Electronics Forum | Tue Feb 16 12:44:05 EST 2010 | esoderberg
95%+ of my boards are small and therefore are panelized using the V-score technique. Getting a lot of resistor cracking even though the resistor is layed out to be perpendicular to the long board edge. What dimension should be used from the board e
Electronics Forum | Mon Aug 30 09:17:28 EDT 2010 | sreid
Yes we have a set Hot-Tweezers. I should have stated above that all of the resistors have been removed already and the new parts are being soldered on. I was just looking for a quicker method of rework. But thanks for the ideas.
Electronics Forum | Tue Feb 23 09:48:26 EST 2010 | dyoungquist
How are you sepatating your boards out of the panel? If you are flexing them to break the V-score, this could be what is causing the resistors to crack.
Electronics Forum | Tue Feb 23 11:05:46 EST 2010 | kjs123p
We had this same problem several years ago. The caps and resistors were cracking when we snapped the boards apart. We now use a pizza cutter style depanelizer. A couple of manufacturers that I know of are CAB and Fancort. I hope this helps.
Electronics Forum | Thu Jan 21 18:11:24 EST 2010 | colormaker
I have a strange problem with 1208 resistors flipping off placed position. I have the same reflow settings that I have used for years with the same solder paste. PAste is only a few months old and it was used just 1 week ago without problems. Some re
Electronics Forum | Mon Aug 30 08:57:54 EDT 2010 | stevezeva
Hi Stephen, Once they've been soldered down, you're stuck with doing touch labor on each and every one. But you might be suprised how quickly this can be done with the right tools. Are they all the same value resistor? If so, that should make things