Electronics Forum | Sun Apr 26 22:47:42 EDT 2020 | autolab
Hello, We would like to manufacture the OBD II port automobile scanner from your firm. What we need from you? To manufacture the PCB, stuffed the components inside and manufacture the housing. Manufacture few samples, then thousands. What we h
Electronics Forum | Mon Oct 12 01:20:42 EDT 2020 | azdback
LandrySMT, after monitoring the errors and considering what we replaced, I also decided to replace the Z hydra motor and encoder. That fixed our problem. I looked at your message and I agreed that the next step was to replace this part. We ran hi
Electronics Forum | Tue Jul 21 20:39:42 EDT 2020 | jmelson
Yes, but they really only seem to be interested in dealing in PPM-refurbished Quad IV C machines. They will sell parts but don't seem to be very interested in supporting other models under the Quad label. (The QSA-30 was made by Samsung, but uses Q
Electronics Forum | Tue Jul 21 14:44:42 EDT 2020 | mcbasol
Dear Evtimov, Thank you for reply. We have decided to buy MS-11 3D due to competitive price and technical service in Turkey. Also, the technical information is quite good. Another reason that we eill buy Panasonic SPG2 Printer, too. Panasonic is solu
Electronics Forum | Wed Aug 12 22:18:42 EDT 2020 | stephendo
Almost all the people here buy boards with the metal already plated on. We are mostly assembly people. The ones you really want to talk to are PCB fab people. And if you want to look into plating PCBs, I would suggest you look up Black Pad. It hasn'
Electronics Forum | Thu Oct 08 18:52:42 EDT 2020 | neosroger
We are looking to improve our SMT Line; We currently have Quad 4C (P&P) CPH; 3600 Capacity: 68 (std 8mm feeders) Minimum Pitch: 0.635mm(0.025") Could you suggest a reliable new Pick n' Place for better CPH and capacity for a value price? We found
Electronics Forum | Fri Dec 11 17:39:42 EST 2020 | proceng1
Are you programming on the machine, or with a third-party software? I use Aegis CircuitCam to program my CS400s. I don't think I've done more than simple edits at the machine in 10 years. I don't know exactly what you mean by "permanent offsets",
Electronics Forum | Tue Jul 05 22:10:42 EDT 2022 | nellegaard
I am currently trying to setup a used MyData My19 machine and am currently having issues installing tools getting errors such as failed to pick up tool and Z force sensor failed. I have tried to clean the tool pickup area as well as clean and lubrica
Electronics Forum | Wed Nov 16 17:18:42 EST 2022 | emeto
Volumes are not the only factor here. You might have low mix and low volume, but high complexity. Machine you pick based on the most challenging components you have to print/place/reflow. If boards are simple, than your level of expertise is importan
Electronics Forum | Thu Apr 18 17:47:42 EDT 2024 | dwl
Is your stencil worn out? If your once flat stencil is now wavey, you will be depositing more paste. Ideally, you'll have historic SPI data to compare known good volumes from past prints to the current. Another possibility is moisture. Bake your boa
