Electronics Forum: 42.0 (Page 116 of 131)

Universal GSM1 manual

Electronics Forum | Fri Aug 17 11:53:42 EDT 2007 | escalador

Hi Dejan: Glad to hear from you. I will check the soft version as soon as I get a transformer. I tried to register on the Universal page without success.I suspect that I have to buy something...,someone from Universal in Spain contacted me by phone

Dedicated or adjustable fixtures for Universal Radial Inserter

Electronics Forum | Tue Aug 28 11:08:42 EDT 2007 | dphilbrick

Dedicated fixtures are always better, assuming you use a good manufacturer. If your a CM you will always have a battle convincing customers to pay for dedicated fixtures unless you have a detailed cost structure that can show them how they will save

Selective Soldering Equipment

Electronics Forum | Wed Dec 05 22:59:42 EST 2007 | er_pe

To be successful, and to yield quality products off any selective solder systems out there on the market today, DFX rules need to be enforced and followed. Lay-out is a one-shot process where as manufacturing of the PCBA is continuous. Obviously, muc

Solder Paste Inspection Systems

Electronics Forum | Fri Dec 28 14:31:42 EST 2007 | clampron

RC, I agree. I have tried to educate management as to the real benifits of height measurement. Our President attended a CEO meeting of some sort and was told that solder paste height measurement will solve all of the worlds problems. She then inquir

USB A Connector help

Electronics Forum | Tue Jan 29 11:37:42 EST 2008 | operator

We have a customer who is using a standard USB Type A Connector on their assemblies. They don't want to add a housing to the assembly, but want to shield the metal USB connector housing from potential shorting with surrounding electronics within thei

Usb Type A Connector Help

Electronics Forum | Tue Jan 29 11:39:42 EST 2008 | operator

We have a customer who is using a standard USB Type A Connector on their assemblies. They don't want to add a housing to the assembly, but want to shield the metal USB connector housing from potential shorting with surrounding electronics within thei

BGA Voids

Electronics Forum | Tue Feb 12 17:57:42 EST 2008 | chef

I must ask the silly question- are you sure you deposited the correct amount of paste? Depending on aperature design-the voiding could come from a stencil that has its holes partially built up with old paste. If paste volume is guaranteed, then what

Inspecting a new stencil

Electronics Forum | Fri Feb 15 08:44:42 EST 2008 | mmjm_1099

FYI, Here are the steps in which we take to get approval. The stencil gerber layer needs final approval through our Engineering dept. What they do is send in a gerber layer from the stencil house and lays it over the current solder paste layer and ve

Board Warpage

Electronics Forum | Tue Apr 29 07:38:42 EDT 2008 | davef

Warpage typically (not always) kinda, sorta points to a fabrication bake induced issue that is the racking technique & may be relieved by "flat baking" under weight. Your baking at 125* won't do dip. You need to get the laminate temperature above it'

DEK 265 Horizon

Electronics Forum | Sun May 04 19:18:42 EDT 2008 | dman97

Hi all, I recently acquired a year 2000 dek 265 horizon. It has a manual screen loader with that stupid hand crank adjustable stopper. Can anyone tell me how I am supposed to measure the stencil image dimensions for a front justified stencil? Now on


42.0 searches for Companies, Equipment, Machines, Suppliers & Information