Electronics Forum: acs (Page 1 of 23)

AC working volatge of a Capacitor

Electronics Forum | Thu May 26 21:25:05 EDT 2005 | thaqalain

The approximate AC working voltage of a capicitor,comapred with it's DC rating is=

Unversal Advantis platform

Electronics Forum | Wed Feb 24 14:59:43 EST 2021 | ilavu

Tom, Go with AC-30 for LEDs. Stay away from Flexjet heads (AC72).

DEK 265 Horizon Servo Following Error

Electronics Forum | Fri Jan 05 12:02:28 EST 2018 | ilavu

Camera works fine from home to ref. position to fiducial1 and 2. Problem shows up from home to board stop. AC voltage between AC1 and AC2 is 41.7 and during move it drops to 41.5.

AC working volatge of a Capacitor

Electronics Forum | Thu Jun 09 17:12:43 EDT 2005 | thaqalain

Capacitor working voltage One very important rating of capacitors is "working voltage". This is the maximum voltage at which the capacitor operates without leaking excessively or arcing through. This working voltage is expressed in terms of DC but th

AC working volatge of a Capacitor

Electronics Forum | Thu Jun 09 19:50:29 EDT 2005 | gb

If you can put an AC voltage through the capacitor it will say its rating on the datasheet. (Wouldn't recommend trying AC on an electrolytic one though!) Here's one to try http://www.farnell.com/datasheets/51176.pdf page 2. http://www.electronics

Need Advice on SMT Pick&Place Machines

Electronics Forum | Thu Nov 24 20:53:58 EST 2005 | adlsmt

Sorry, the AC-30 is the "Lightning Head" machine and the AC-72 is the flex placer. The price is correct. Was in a hurry to get home on Friday and reversed them in the sentence after the price.

ionic residues on the surface of printed circuit assemblies

Electronics Forum | Wed Sep 02 16:41:44 EDT 2009 | pcbcleaning

Advanced Cleaning Solutions is a Johnstown, PA based electronic manufacturing service provider (EMS) with more than 3,500 square feet of ESD safe facilities. Our services include precision PCB cleaning and ionic cleanliness testing/verification usin

GSM 2 fuse 7 on AC chassis blows up at start up...

Electronics Forum | Fri Aug 02 13:49:03 EDT 2013 | jaimebc

Suspecting a short on the AC chassis, suspecting a short on T2. Thanks in advance for your input.

Philips Topaz - conveyor motor doesn't work

Electronics Forum | Tue Sep 01 11:12:18 EDT 2015 | zombee

Problem is solved! There wasn't voltage on motor inputs (only 5-10V AC) when the motor connected correctly, but was ~210V AC without motor. Firstly, I exchanged the motor speed control relay (Panasonic G-series type), but the result was same. (the a

Testing needed

Electronics Forum | Wed Sep 01 14:36:14 EDT 1999 | S. Schoppe

I am looking for a service company to verify my AC/DC converters meet the vendors specs.

  1 2 3 4 5 6 7 8 9 10 Next

acs searches for Companies, Equipment, Machines, Suppliers & Information