Electronics Forum | Tue Dec 13 12:56:17 EST 2005 | grantp
Hi, We have a problem sometimes where our soltec oven will accept another PCB too soon after it's taken the last one, so the PCB will collide with the last PCB that just enter the oven, and knock half the components off one of the boards, and destro
Electronics Forum | Thu Dec 15 02:09:22 EST 2005 | tk380514
SNAGGLETOOTH HOLDS HIS HANDS UP, HAVING JUST REACHED THE EDGE OF HIS OWN IGNORNACE. I just read up on black pads - http://www.emsnow.com/npps/story.cfm?ID=9784 when i checked the joints under the microscope they were a light grey slightly discolou
Electronics Forum | Thu Dec 15 19:43:33 EST 2005 | Liza
Stefan - We are using an automatic sealing equipment and have several controls also. The particular machines used for processing these products could be narrowed down to 5 machines at most. The sealing temp, pressure and dwell time are checked on a
Electronics Forum | Sat Dec 17 13:58:25 EST 2005 | bvdb
Jared, Thank you for the help. AFter following your advice we were able to get the display to say Jog L. However, pressing the UP or DOWN arrow or pressing the "F" key and the UP or DOWN arrow didn't do anything. The trays stay put. When we requ
Electronics Forum | Tue Dec 20 16:56:53 EST 2005 | rsmith
I manufacture ESD supplies such as smocks and conduct ESD audits from time to time. With that said, here is my deal on smocks...ESD smocks work well to shield harmful static charges on clothing such as wool, silk, and synthetic fabrics. It is like we
Electronics Forum | Wed Dec 21 10:36:53 EST 2005 | Loco
We have used real ESD smocks in the past, we did do those correct test, turned out after washing them 3x at 30�C, they were useless, can you image the cost involed with suppling staff with new clothing every 3 weeks? Well we did anyways and just ch
Electronics Forum | Thu Feb 02 00:39:47 EST 2006 | Cmiller
Please leave some feedback after you get your machines. So far, ours are running well beyond our expectations. I did not get much feedback from users here though when I asked about them before we bought them. Although we had little feedback, we had n
Electronics Forum | Mon Jan 16 16:11:25 EST 2006 | slthomas
We currently use Armakleen E-2001WS in our Trieber inline cleaner and I'm trying to review the process and look into upgrading the chemistry if it's appropriate. After a little research I've concluded that I don't have nearly the information I need t
Electronics Forum | Fri Feb 03 11:13:05 EST 2006 | cyber_wolf
Daxman, The noise you are hearing is a worn out coupling on your large C-axis motor. The pins get loose after a while and they make noise. We had the EXACT same problem. Your station 17 and 19 errors are most likely from dirty windmill sensor dogs
Electronics Forum | Thu Mar 30 19:25:26 EST 2006 | daxman
I bet my bicepes are bigger than yours. Just kiding. I do appreciate the help and advice each one of you gave. I should also mention that during the production cycle, our cp6 gets to a point where it kind of just stops...almost like it's thinking...
