Electronics Forum | Thu Aug 09 16:24:27 EDT 2018 | ks0707
Hi Thomas, Thank you for your posting and I agree with you that Printing is the most difficult one. BTW, after you ran the one side (let's say Bottom side), my engineer worries about the distortion of flex board because of the thickness. In that ca
Electronics Forum | Mon Oct 15 14:29:58 EDT 2018 | compit
I have an Emerald X machine (by Assembleon) with an LCS. I start production. The first PCB board runs to the end of the LCS (item 1). Each subsequent stop is BEFORE LCS (item 2) - I have to remove it manually. And so until the production reset - then
Electronics Forum | Wed Jan 09 01:22:39 EST 2019 | kenneth0
Hi Simond, The baking process is likely to remove any moisture after the cleaning process. We wouldn't want any moisture trapped as this might cause delamination if the package is subject to subsequent heating/reflow process. Hence there's a staging
Electronics Forum | Tue Feb 05 12:44:42 EST 2019 | davef
Again. Mirtec wins "best booth babe." Michele, at Seika, is my favorite booth babe of all time. Although, some of the ladies in the booths from Chinese companies were knock-out gorgeous!! It was insane that IPC put the CFX demo lines up on the seco
Electronics Forum | Wed Mar 20 14:05:29 EDT 2019 | alexcouto
Hello again, I put the motors 1 and 6 back in their correct positions, but head 1 now gives me a new error. will it be necessary to configure the head 1 motor in any way? I was still checking to see if the belt and the engine would be in position, bu
Electronics Forum | Wed Mar 27 13:47:24 EDT 2019 | whitelancer64
I am having an issue with aligning vision for solder paste inspection with the PCB in the Momentum machine. The SMT operators setup the profile on the machine, which I then import into Aegis CircuitCAM to add PCB locations. But when I export again, t
Electronics Forum | Fri Apr 05 08:02:58 EDT 2019 | Matt
This feedback is greatly appreciated! I had my reservations on the connection validation features, as you said good in theory but I really wanted some practical information without having to purchase to get an extended feel on our various application
Electronics Forum | Mon Apr 08 14:16:29 EDT 2019 | sever_83
We've never heard of seen of such a thing either. We tried a clean sample board and applied con coat. Same process through out and we saw nothing. After speaking with the original operators who was curing the boards he had left the boards much longer
Electronics Forum | Tue Jun 18 23:29:02 EDT 2019 | SMTA-David
Hi, I have an older Samsung pick and place (CP-40LV model). During last few runs I have experienced several feeders with the clear plastic tape cover not peeling back to expose the next part. I manually pull back the tape and it runs for a while and
Electronics Forum | Tue Jul 21 10:38:54 EDT 2020 | artyvesna
Thanks a million. We are quite restricted with available length for the oven (about 5meters/16.5ft).Throughput itself is not so much of a concern, it is ability to be precise with thermoprofiles together with some future proofing (extra capacity) tha
