Electronics Forum | Tue Oct 14 09:51:20 EDT 2014 | rgduval
I've always used multiple verification, and it's worked rather well. But, it depends on the people that are doing the verification, and their commitment to accuracy. It also requires a little bit of extra time. Given your system, are you still get
Electronics Forum | Wed Jul 22 05:54:41 EDT 2015 | langkeauto2015
Hi, Tsvetan, sorry for your bad experience for Chinese brand PNP machine. For your doubt, pls refer to my comment:) Our pnp machine is special for led tube, led panel, led strip, RGB strip, and led display screen PCB, and real working speed feedbacke
Electronics Forum | Thu Aug 13 19:54:01 EDT 2015 | aemery
The camera assembly is designated as X23; the stencil & board lighting as well as the camera video signal pass through the DB9 connector at the camera. There is a ribbon cable in the vision gantry tray that carries both to the box on the left side o
Electronics Forum | Wed Aug 10 02:38:36 EDT 2016 | zxcvb
I guess I've been somewhat ignorant when it comes to the finer details of pcb layout. Lately I've read a couple of books that try their best to lead me on the straight and narrow. Here is a couple of examples of a recent board of mine, and I have hig
Electronics Forum | Thu Sep 15 10:43:18 EDT 2016 | claudea2
Thanks to Bobpan we re connected our wipe system and all the air actuators work fine. I still have a problem with the cleaner fluid dispenser. It is not moving as it should to dispense the liquid when we do the command. I suspect the values in the c
Electronics Forum | Tue Oct 10 07:30:19 EDT 2017 | spoiltforchoice
TBH I think perhaps the OP deserved it, there is perfectly good explanation of Reflow and Process Window Index on Wikipedia for starters and if you want more all sorts of FREE specialist papers on things like reflowing flex circuit, lead/lead free et
Electronics Forum | Fri Mar 02 05:50:06 EST 2018 | tsvetan
I wouldn't bet on 24/7 support from company which can't even describe properly in English what they sell on their web. The questions you should have ask this manufacturer are: - how many machines they have sold and where? - can you speak with their
Electronics Forum | Fri Mar 09 01:48:26 EST 2018 | aemery
Unfortunately Gerber EZ is probably the one thing I know very little about. As an FSE with Speedline I only had one client at that time that was using it and an application engineer came in and helped them with it. Sorry I can't give a direct answer
Electronics Forum | Fri May 11 16:06:09 EDT 2018 | aj
answers: The software on these machines is kinda flakey and the manuals are almost useless. There are a lot of bugs in the vision software that bite you. I supported mirea/meridian equipment at a past job and my memory is a bit fuzzy, but here are
Electronics Forum | Wed Sep 04 13:58:36 EDT 2019 | smrsteve
Hello Bobpan, Thanks for the response. 1. Function 30 gives me a consistent 182-185, even after nozzle changes. I can vary this by changing mod code 15 and I have been advised to aim for 90-110, but it doesn't seem to make any difference so I've go