2568 air results

Electronics Forum: air (Page 76 of 257)

GSM1 Y Axis Limit Switch

Electronics Forum | Fri Apr 28 18:16:44 EDT 2017 | ttheis

Try cleaning the linear encoder reader. I've had dust build up on two of my machines resulting in failure to calibrate. Blowing out the reader heads with gentle compressed air resolved it.

MC110 High-Accuracy Manual Stencil Printer

Electronics Forum | Tue Jun 13 07:22:50 EDT 2017 | emeto

If these are snuggers(locking PCB from the side) that means one or two of these handles move the Z table up and down. Is there any air going to this machine that you diddn't connected? Or your pins underneath might be adjustable.

Soldering electrolytic capacitor

Electronics Forum | Wed Jul 12 07:33:11 EDT 2017 | bk

Another option you can try is to use solder paste with a dispensing machine and then use a hot air gun to reflow the solder paste on the smd caps

Soldering fume extraction

Electronics Forum | Thu Aug 17 06:28:38 EDT 2017 | smeissner

Have you ever dealt with air purification issues? What system are you utilizing for soldering fume extraction and filtration?

Soldering fume extraction

Electronics Forum | Thu Aug 17 09:56:02 EDT 2017 | capse

Have you ever dealt with air purification issues? > What system are you utilizing for soldering fume > extraction and filtration? I rep PACE. They have an instructional video; https://www.paceworldwide.com/pacenter/videos/pace-fume-extraction-vid

Auto cleaning squeegee

Electronics Forum | Wed Aug 23 02:03:26 EDT 2017 | vincent1991

hi dear. i'm interest about auto cleaning squeegee and i wanna know , is it really work ? I mean is it possible to clean squeegee with air knife ? thanks .

Reflow Oven Specifications Check Items

Electronics Forum | Thu Aug 24 02:10:52 EDT 2017 | fadzril

Hi! My company is considering to purchase reflow oven. Specifications : 10Zone Air Reflow, N2 Ready. What type of items should I consider? 1. Cooling Zone? 2. Length? 3. Power Ratings 4. Flux Trap Kindly advise. Thank you.

Best Fluid For P&P Nozzle Cleaning

Electronics Forum | Tue Nov 07 13:34:29 EST 2017 | tsvetan

isopropyl alcohl will not harm plasic what we usually do is to dip the nozzle for few minutes in alcohol then pressure air to blow all dirty from it

QFN84 Solder Printing Issue (QFN with Inner LGA Pad)

Electronics Forum | Fri Dec 01 14:55:51 EST 2017 | kojotssss

Rework said that with hot air gun, heated the solder paste comes out of the middle part out to the side terminals and soldering extending beyond is perfect.