Electronics Forum | Thu Oct 15 19:00:58 EDT 2009 | ericg2000
I started a new company that has a Testronics 504 AOI machine. No one knows how to program it, and they can't find the manual. So far I have been able to load a centroid file, and set the board size. However, when i load everything, all my parts a
Electronics Forum | Tue Jan 11 13:28:14 EST 2011 | jmw
0603 and up should be no problem on the machine. If you are doing under 25 mil pitch the machine needs an upward camera to repeatably place the parts. You will always lose the first 10 or so parts with cut tape but that should be about it. Repair par
Electronics Forum | Mon Mar 07 22:40:36 EST 2011 | sarason
I have written an SMT file generator available at http://users.tpg.com.au/sarason/index.html try the YM6021 generator output option, it is very similar to a CSM66 file. The YMxx series file is a little different in format. This should help your file
Electronics Forum | Mon Apr 25 20:54:25 EDT 2011 | veeckm
Hello, First of all I am new to the forum and surface mount machinery in general. The machine in question has a problem picking parts correcly. The main problem seems to be that the camera and actual head location is out of calibration? If I do a ru
Electronics Forum | Fri May 06 09:33:22 EDT 2011 | jimlas53
RLM, you have been very helpful! Let me try this on you: We have two IVC's, one with a conveyor and Quadalign, the other with a workholder platform and Cyber-optic. I just ran the first successful assembly on this second system, but the extents had
Electronics Forum | Tue May 31 14:23:16 EDT 2011 | gosswald
I bought an “as is’ Quad IIC package a while back. The machine definitely has issues with the Quadalign Board. The ICs were literally falling off of the board. I am guessing when it was manufactured they did not get the PC board quite hot enough or s
Electronics Forum | Thu Sep 29 19:11:47 EDT 2011 | swag
Now I see - not sure. The only trouble I've had that was similar was because an electronic eye on one of the stages was seeing a machine that was installed a couple inches over the top of the conveyor. We had to install a flat black plate on the ma
Electronics Forum | Tue Oct 11 09:26:42 EDT 2011 | dilogic
For all of you that are using this version of GSM USOS, I've made a patch that changes default fiducial repair drop-down menu from "Reteach Fiducial" to "Alignment Done". We had a large batch of boards with lousy fiducials and it drove me crazy havin
Electronics Forum | Wed Apr 04 13:33:12 EDT 2012 | rway
We currently have 2 M1 systems. Our false call rate has never been has high as you suggest. There is something wrong with your program and/or inspection algorithms, as you probably already know. You should be somewhere between 1000-1500 vcpmo (fal
Electronics Forum | Mon Jun 04 23:52:57 EDT 2012 | rway
Actually, if you experience lack of witness marks, you probably have a problem. Witness marks are OK and will not affect your assembly. I assume this is an SMT assembly we are talking about, in which case, this is what your test pads are for. You
.gif)
