Electronics Forum | Wed Apr 17 14:03:37 EDT 2002 | lysik
Pansonic is Real good about support once you have registered a machine. But They are in serious violation of the law if you have a part number and want to buy a part. In the USA a OEM must sell you parts no questions asked as long as you have a part
Electronics Forum | Wed Apr 17 23:00:11 EDT 2002 | lysik
A DEK 265 Mark 1 is an old system. That does not mean that it does not work well. It is a very good system. It has however past it's 7 year support life. As far as a person that works for a OEM working on your machine there is no law that says he or
Electronics Forum | Mon Apr 15 15:34:07 EDT 2002 | Bob
Hi, I have loads of experience with QP132's. You can change over product quite easily depending on a few things: - � The board sizes should be the same otherwise pallet adjustment can take an hour or so. � If you can fit all the feeders on one set-u
Electronics Forum | Wed Apr 17 13:57:39 EDT 2002 | stefwitt
There is no excuse for bad telephone etiquette. The service tech. will take all the blame and consequences although other people in the company should take the blame as well. The service technicians are usually among the lowest ranking employees in
Electronics Forum | Tue Apr 23 01:39:29 EDT 2002 | ianchan
Hi, 1) Was reading the links provided by Dave F, under the thread "waste" which was about the ESD grounding of drums. 2) thanks to Dave F, now have "back-bone" refer sources to explain ESD terms to those who ask and seek to better understand this n
Electronics Forum | Tue Apr 23 12:17:28 EDT 2002 | binns
I have a couple of questions for you, and a couple of answers. 1. Which model ? (100, IIc, IVc, QSV, QSP ) 2. In reference to how the machine stacks up with Fuji and Panasonic. They have never stacked up. Those families of machines have historicall
Electronics Forum | Fri Apr 26 10:42:28 EDT 2002 | Jim M.
I worked for a telecom company that had sites in the deserts, jungles, mountains and regular built up area's. All boards were built using Aim 291/293 No clean solder paste. (all boards built to Bellcore standard) The boards were coated with Dymax ur
Electronics Forum | Mon May 06 11:49:20 EDT 2002 | Jacob
Hello all, I am having soldering issues with an Everlight component it is a TM4201/TR2 (Right angle IRDA with a 1mm pitch). The problem I have is that after reflow the solder joints look perfect, but during test we are losing 7 micro amps as soon as
Electronics Forum | Wed May 15 22:23:38 EDT 2002 | ianchan
Hi mates, need some help to resolve a thumb-twine situation. As a high-mix, low volume prototype build house, we always conduct a first article inspection (FAI) on every model setup conversion in the SMT production Lot run. we do this FAI by mounti
Electronics Forum | Fri Jun 07 07:54:31 EDT 2002 | Hussman69
Wow, slow down guys. The Cyber Sentry (with an S - sorry) is a machine designed to just measure solder paste height, volume, etc. The first models used a laser, but the newer models are a little more sophisticated than that. They have tabletop ver