Electronics Forum | Mon Jan 30 00:51:38 EST 2006 | pavel_murtishev
Good morning Greg, Probably I can help. I made a lot of offline programs for Topaz/Topaz-X in the past (these machines also use VIOS). So, if data format for Comet and Topaz is the same I will help you. Please export your sample program into TXT for
Electronics Forum | Wed Feb 01 04:51:11 EST 2006 | ianlg
Hi Robert I am unable to comment on the two machines in question as we never choose to knock the competition. But you might like to also consider the following fully auto screen printer which was released at Productronica last year. http://www.repr
Electronics Forum | Thu Feb 02 09:28:39 EST 2006 | Alan
Hi Jim, I am very interested in the above mentioned technology. I am currently trying to get some samples sent over to me from you guys. Can you give me any advise on this process and also with the imminent changeover to Leadfree ,will this hinde
Electronics Forum | Mon Feb 06 15:50:10 EST 2006 | ajaygarg1980
Hi, We are electrodepositing Au(0.25 to 0.5 microns) on Cu & using solder ball bonding process via laser.We are getting lots of voids within the solder (not kirkendall voids). Can anyone shed some light on this problem.We are not using any flux.Pre
Electronics Forum | Tue Feb 07 10:11:06 EST 2006 | amol_kane
hi, the only way you can say that the process is in/out of control is to plot the values (mean) of a metric against the 3 sigma limits for a Xbar chart, or plot a individuals run chart. you can also do a capability analysis nased on a metric (say,
Electronics Forum | Wed Feb 08 12:23:12 EST 2006 | slthomas
Just to nitpick a little, collecting defect data and reacting to it really isn't an SPC function. Cal's recommendations (determine critical processes, assess process capability and acceptable limits) are spot on and are pretty much the definition of
Electronics Forum | Mon Feb 13 00:11:19 EST 2006 | jeffr
I have YV100 manuals. Tell me the Serial number of the machine. There are several models: YV100-1, YV100-2, YV100XG, YV100X, YV100XT, YV100XTG. Do you also need spare parts? Reply to jr@hrltd.com.au
Electronics Forum | Wed Feb 08 20:05:16 EST 2006 | gcolbert
My company was considering buying RV-2E/s to perform functions in a electronic circuit board manufacturing facility. Are they any obvious situations where this machine can be used? Soldering/labeling/station transfer/general assembly? Any suggestions
Electronics Forum | Wed Feb 15 01:32:56 EST 2006 | tk380514
I need to change Drill holes sizes in a PCB from 0.6mm to 0.55mm. Do it need to change anything else other than the Drill hole size in the INfo section of the Gerber file, for example do i also need to change the artwork of the other layers if the dr
Electronics Forum | Thu Feb 16 11:40:40 EST 2006 | russ
I am in agreement with Steve. I take great pains to ensure that my tape jobs do not come undone. As someone else noted I also preload the tip to the board so it stays in contact. I still need to ask why do we need to care about this tiny differenc