Electronics Forum | Wed Jun 13 01:01:10 EDT 2012 | isd_jwendell
I clean all fids with a fiberglass brush pencil so that I know there will be no rejects (it doesn't take too long). The problem is the machine lighting. My Essemtec machine uses a light ring (red LEDs) around the cam. Here's one of many documents th
Electronics Forum | Fri Jun 15 08:00:08 EDT 2012 | deanm
ENIAC, 0.040" equates to 1mm, not 0.1mm. 0.040" is the IPC minimum recommended fiducial size and when we started putting fiducials on our boards I assumed that all equipment manufacturers should be able to automatically spot that size. Since then I'v
Electronics Forum | Tue Jul 03 02:43:20 EDT 2012 | grillomalta
We clean a good number of fiducials, mostly where HASL PCBs are used. Since the pad is not exactly flat, our SONY 1500 MKII reflects the light from what is essentially, a small 'mound'... Many times our operators use an eraser to 'dull' the finish.
Electronics Forum | Tue Jun 12 16:53:56 EDT 2012 | proy
I need a lCS hook motor for an "Xii" dual shuttle LCS. If anyone has an orphan dual shuttle LCS for Xii generation machines please email if I can purchase the part. Delivery is 3-4 wks, will order if I have to, but don't want to wait that long. PR
Electronics Forum | Fri Jun 22 06:31:08 EDT 2012 | grahamcooper22
Are you spray fluxing ? If so, check that you are getting flux onto the whole pcb uniformly.... That BLT flux is a water based material, are you getting rid of all the water in the preheat before you get to the wave ( can you hear any spitting as t
Electronics Forum | Thu Jun 14 21:37:53 EDT 2012 | kmots15
Warm De-Ionized Water and a brush? If they water soluble... Realistically, We need to know what flux your working with. Typically the manufacturer will recommend a cleaning methods on the TDS, easiest to stick with that. If they are high reliabili
Electronics Forum | Sun Sep 20 01:47:21 EDT 2015 | alexeis
Hi, We developed many solutions that can help you and save a time. Our solutions is also dedicated for small companies as you. You can read about some solutions and tools on our website: http://www.proventstech.com. Also, you can send me an email a
Electronics Forum | Mon Jun 18 22:08:45 EDT 2012 | bigvern
Hi, we are trying to locate some parts for a DEHAART semi auto printer, if anyone has any old spares machine, please advise. Have tried most of the phones numbers on this forum in regards to dehaart but all numbers are no use due to dehaart being fi
Electronics Forum | Wed Jun 20 21:07:25 EDT 2012 | bigboy
Have a look at AOI Systems Scanspection AOI. The desk top unit is very affordable, easy to use, and a very effective tool for new users to AOI. Visit http://www.aoisystems.com for more information or send me a PM and I will be happy to talk with yo
Electronics Forum | Mon Jul 02 07:41:08 EDT 2012 | jsolloway
I am going through the process of re-evaluating our AOI systems. Depending on the complexity of your assemblies, I would recommend Mirtec's, and aoi systems as the previous post suggests. Had a demo from them a month or so ago and for the price the