Electronics Forum | Sat Oct 29 20:29:30 EDT 2016 | adamjs
Posting here because all the threads asking for feedback on it are locked. We have been extremely happy with the 4300 tacky flux for BGA attachment. Not only is it both washable and no-clean (i.e. wash-optional), it was also the only tacky flux tha
Electronics Forum | Sun Dec 11 22:39:36 EST 2016 | ppcbs
We have been using the Amtech line for over 12 years now with all of our PCB and BGA Rework. The NWS-4400 is mildly active and will give better results with Lead Free Solder. Note that the LF-4300 is considered a No-Clean. However it will show lea
Electronics Forum | Tue Nov 01 11:57:19 EDT 2016 | spoiltforchoice
I don't know how accurate an idea you will get on eBay. Here in the UK the only stuff that ends up on eBay is total crap, manufacturers and brokers between them seem to get hold of most of the machines when they come to the end of their lease or usef
Electronics Forum | Wed Nov 02 16:35:20 EDT 2016 | csm
Dear FUJI Specialist, I need your HELP, we have an CP8-42-E and machine was working properly and from one day to another when we Turn ON the machine make all the startup and check all the list, when all is ready, you have to Puch Ready and automaticl
Electronics Forum | Tue Nov 08 12:05:57 EST 2016 | aemery
Lachrymal, Where are you getting that from. Let me keep this simple because there can be so many variables in modern printing, some you can control and some you can't. Unless you are designing your own PCB's where you can decide how to orient the co
Electronics Forum | Mon Nov 07 10:33:48 EST 2016 | huske
Which process do you have a question about? Is there something more specific you're looking for? Basically you're close on the cycle. And this is a very basic cycle, there are many types of nozzles,machines,methods that will do this slightly differe
Electronics Forum | Tue Nov 15 07:40:13 EST 2016 | robl
1) Look at who is actually franchised to sell the manufacturer in your region, cross check with MFG website. You can buy non-franchised, but if something goes wrong don't expect the local guys to help. 2) Do your engineers/customers need technical s
Electronics Forum | Sat Nov 19 03:15:39 EST 2016 | sarason
Does the file come off of an ICT. Next question is it an AGinet/HP/Keysight 3070. If so you have a chance at finding out the format. It is probably posted online in the Keysight manual downloads section. I might still have an old paper copy of this
Electronics Forum | Wed Nov 23 19:50:23 EST 2016 | gmscribe
Hi guys, I'm working on a design involving a 223-pin BGA with 0.5mm pitch (ball size 0.3mm) with a 16-bit DDR3 controller involved. Currently routing a track between two balls is resulting in a track width of 0.1mm and a spacing of 0.077mm. Now the
Electronics Forum | Fri Nov 25 05:16:44 EST 2016 | slavek
Hello, I want to ask on suitable temperature profile for PCBs with ENIG final surface finish. I know that it is complex question with many unknowns. When the PCB will be standard 1,5 mm 35/35 Cu and the amount of components will have any influence o