Electronics Forum | Tue Feb 23 02:43:37 EST 2021 | gabriel1blue
We just came out with a new problem with these machines. We had to shutdown for a a few weeks due to Covid-19 and now they have errors when we start them up. Looks like the back up batteries died and after we replaced all of them the settings are com
Electronics Forum | Sun Jun 14 03:02:14 EDT 2020 | kylehunter
We did a batch of boards with lead free HASL that we thought was leaded. Using standard leaded paste worked, but we did have some wetting issues. The issues were resolved when switching back to leaded HASL. Can't speak to your specific fiducial issu
Electronics Forum | Wed Jun 24 14:31:36 EDT 2020 | kumarb
Thank you so much for your comments. It sounds very logical as the probes are indeed the original along with the rest of the insides of this machine (270 hours of on time). The entire module is offset by 50-75 degrees cooler so suspecting that the pe
Electronics Forum | Tue Jun 30 18:07:34 EDT 2020 | daisy_mu
Hi Phill Thank you, It´s a possibility because that model has many false calls and real defects, but only in one component. A while back we had a similar problem and we changed the component number to a new one, and the cycle time was better, but th
Electronics Forum | Mon Sep 07 08:01:21 EDT 2020 | aurash
Thanks for the good advice - the UPS is fine (to be sure I disable it but the problem was still there) In the meantime we found the root cause - the XMP SyncNet card failed. We replaced it and it's all back in motion. Many thanks to all who had rep
Electronics Forum | Tue Oct 06 15:01:33 EDT 2020 | charliedci
We've used glass (pyrex, corningware) bread pans in the past, not filling them much over 1" deep. It takes a while but leaves solder ingots sized well to drop back in. Have not tried lead free yet, the higher temp could be an issue using same ty
Electronics Forum | Thu Oct 22 22:13:20 EDT 2020 | gabriel1blue
I got new belts for the original floppy drives and installed them but the machine was reset to Japanese and after changing it back to English the drives are not running or powering up even though we can measure that the 5 volts are coming into it. I
Electronics Forum | Sat Nov 07 18:38:32 EST 2020 | enzik
Hello to all, The Fuji GSP III screen printer was working well yesterday. This morning, the machine turned on and the display screen was showing nothing. I went to the back of the machine and reset one of the VM1152A. The display screen is now showi
Electronics Forum | Mon Jan 25 13:39:51 EST 2021 | grahamcooper22
Thanks for your reply. According to the manufacturer there isn't any palladium under the solderable coating on the chips...just nickel....i guess maybe the nickel is heavily oxidised. I have experienced the poor solubility (zero solubility at 210 deg
Electronics Forum | Thu Jul 22 17:30:53 EDT 2021 | proceng1
SWAP blades from front to back. Make sure the tooling/ board supports are arranged correctly. Is this a foil stencil on a frame, or a complete framed stencil? I've had worn out foils that "roll" with the blade in one direction worse than the other.