Electronics Forum | Thu Nov 05 07:54:40 EST 2009 | jeffreyj
gregp - that's the main problem I am having here: there is so little basic information available about these machines. It's almost like the sellers intentionally put as little information as possible in their listings on this site, equipmatching, etc
Electronics Forum | Wed Feb 03 20:26:49 EST 2010 | mika
Hi, First: 1. What os/system? 2. what s/w version? 3. what type of machine model? 4. What type of head configuration? 5. Do you have this head front or back? 6. Do you have encounter this problem before? 7. Have you recently placed any new "high com
Electronics Forum | Wed Nov 03 12:08:59 EDT 2010 | hegemon
I had an opportunity two years ago to evaluate three benchtop AOI systems. Omron, Yestech, and Mirtec. I was fortunate to be able to have all three machines side by side for my evaluation period, which lasted near a full month. At the time I was
Electronics Forum | Mon Jan 17 10:01:48 EST 2011 | rgduval
We have generally seen that as volumes increase, quality can sometimes suffer. There are various reasons for this, but, we have found that the majority of them involve rushing and minimal process controls. How to handle it with your CM? Well, it
Electronics Forum | Tue Jun 26 15:05:02 EDT 2012 | upguy
Thanks for responding Fred and Peter. We have had the same damage to the tip occur even though our TP9-UFP sits in an air conditioned room (74 F / 23 C). I spoke with Matt at MyData (who was very helpful). He said that the X-axis bearings, the X-a
Electronics Forum | Sat Aug 18 22:43:14 EDT 2012 | eadthem
we service all of our lightning spindles once a year, Take the spinldes off. loosen the screw by the nylon cap and slide the locking pin out. run the spindle shaft, the nylon cap and pin assembly , and spring thrue a ultrasonic cleaner with 99% is
Electronics Forum | Thu Oct 18 10:28:23 EDT 2012 | wucern
I study at the Institute for Entrepreneurship & Innovation at the Vienna University of Economics and Business. We are working on a project with CERN that is about a new technology of data aggregators and our first goal is to find potential fields of
Electronics Forum | Mon Mar 11 07:58:59 EDT 2013 | cyber_wolf
So I have this issue with my 1240. During my weekly oven surveyor check I get a software alarm that says I am out of tolerance. Probe #3 which is closest to the hinge side of the oven is approx. 10 degrees hotter in zone 12 than the other 2 probes o
Electronics Forum | Wed Apr 03 07:07:44 EDT 2013 | leemeyer
The manuals will not teach you how to use Autoprogram but they will be a reference once you learn it. First you must configure your system. Try this and let me know how it goes. To Configure a machine: -Under Machine Configuration Select Assembler/S
Electronics Forum | Thu Sep 26 23:14:25 EDT 2013 | zsoden
We picked up this old (circa late 80s) Seho 1135 machine last year for next to nothing. It needed a bit of TLC to bring it back to working order but it's 99% working now. The only problem left is that we cannot get sufficient height from the delta wa
