Electronics Forum | Tue Mar 27 09:21:45 EDT 2007 | realchunks
Hi Donovan, I guess it really depends on the product, how it's built and how you'd stress test it. Many arguments can be made about how far to test, then when one fails in the field was it due to manufacturing or test? But the bottom line is most
Electronics Forum | Wed Mar 28 09:25:53 EDT 2007 | SWAG
Yes, pre-loaded feeders is the best way. If you do not have that option as you are high mix or do work for different companies that have many different part numbers, I would guess that your printer will take about 15 minutes to get ready, each HSP f
Electronics Forum | Thu Mar 29 14:43:22 EDT 2007 | jmelson
For a microscope, you want one with the greatest working distance and depth of field you can get. You don't want a lot of magnification, so something like 0.7 - 20 X is good. If you are buying new, have salesmen bring them by and actually try them
Electronics Forum | Thu Apr 26 05:12:24 EDT 2007 | basem
Hello, I'm trying to setup a low volume SMT production line with many changeovers per one day. Looking at the several options out there, I have considered the following: 1) ESSEMTEC http://www.essemtec.com 2) Autotronik http://www.autotronik-smt.de
Electronics Forum | Thu May 17 19:21:39 EDT 2007 | diesel_1t
We are currently using Oven Rider (ECD) to "verify" just the conduct of the peak temperature; we define which product is the higher runner for this line and then with the settings for this product (already profiled with thermal couples attached to th
Electronics Forum | Sun Apr 29 01:31:06 EDT 2007 | basem
Hello Grant, There is nothing impolite about your post: 1) Almost all of the German made machines are 100% German. (well, Siemens uses American software and for that they did not extend to us an offer!) 2) Since the U.S., and thanks to Bush and h
Electronics Forum | Fri Jun 08 09:53:23 EDT 2007 | rgduval
What is the general consensus on automated solder paste inspection? In a previous life, when we implemented AOI equipment, we implemented it at the end of the SMT line; our reasoning was that our screen printers had adequate repeatability for our pr
Electronics Forum | Fri Jun 15 12:08:49 EDT 2007 | ck_the_flip
Hi Grant, 1st off solder paste data sheets are just "guidelines". You always need to set your specs. based on the needs of your own process and product. Don't ever follow your solder-paste data sheet to the tee, or you're severely limiting yoursel
Electronics Forum | Tue Jul 10 11:25:36 EDT 2007 | jax
Multiple Factors that account for Scrap: During Set-Up: A percentage will not work. When setting up feeders you will normally use a certain length of populated pockets. The amount of parts this affects depends on 1.type of feeder 2.type of part
Electronics Forum | Fri Jul 20 10:44:56 EDT 2007 | gmoritz
If you bought it from an equipment dealer ... OK, the dealer has come through and is (allegedly) sending a full compliment of documentation to arrive by Monday. > ... they need weekly maintenance ... > ... you WILL need parts for it. ... > Do you