Electronics Forum | Mon Dec 11 14:26:11 EST 2023 | proy
Looking for ideas/conversation on how people handle short strips or leftover SMT parts in inventory We do a lot of high mix low volume jobs we often have strips or even parts in bags which we need to keep and inventory. Presently the non reels are
Electronics Forum | Fri Jan 05 18:04:35 EST 2024 | madisreivik
My old machine still has tricks to annoy me 1CA0C004 vision error. Trying to place large part, about 30x30 (gsm micromodule). Very simple part, square. But machine is dropping that part and gives vision error "nozzle bent". Part rotation is 90 deg
Electronics Forum | Thu Feb 15 20:16:59 EST 2024 | erici
thanks for the reply. The Step motor module at the head is defective, so when the machine does the reference run, it will give a timeout because the DP station and pick and reject stations are not working. I reckon if i disable the RV, maybe i can
Electronics Forum | Tue Mar 19 14:57:48 EDT 2024 | spoiltforchoice
I hadn't suggested the IINEO's because as a step up from Neoden's its a huge leap in price and perhaps around twice the price of the AM100, that gap would narrow as you purchased even more feeders. If you have a big product mix or are a small batch
Electronics Forum | Tue Apr 23 17:40:06 EDT 2024 | cyber_wolf
Yes X-outs impact cycle times. Firstly, unless your board house is adding the bad marks you have the added labor of doing it yourself and programming your machines to look for them. Additionally, it adds time to each machine in the line (except for s
Electronics Forum | Mon Jul 15 18:29:46 EDT 2024 | ktm250rider
Surprisingly, i found my answer shortly after posting. I was just staring at the main menu and there is a setting for start step, end step and total steps. The end was set to 3. Not sure why. When i changed it to 6 all worked out. However, on o
Electronics Forum | Tue Jul 30 21:50:28 EDT 2024 | bsziszi
In case of DFN and QFN package the most of the connection is made on the bottom side of the terminal. According to the IPC is not mandatory to have the tip (side flank) to be wetted. Since it is difficult to visually inspect the solder joint, Xray is
Electronics Forum | Thu Feb 17 21:45:26 EST 2000 | Dave F
Steve: Wadja mean "I fixed it, now tell me what I did to fix it." Steve, you�re one scary guy. ;-) "Steve�s Longer Pad Theory" - Stubby pads will not make solder flow-up the leads of a QFP100, leaving sparse solder on the pads. Given a choice, s
Electronics Forum | Fri Feb 11 10:14:54 EST 2000 | C.K.
Dave, to answer your questions, point-by-point: � Just out of curiosity, how are second side, skippy components oriented on the board with respect to the wave? The SMD's are all oriented in the "correct" direction with respect to wave direction(i
Electronics Forum | Sun Oct 01 05:00:08 EDT 2000 | jarnopy
Okay, you have only few different product. Smallest package is 0402 and biggest is 144 pins ic. So, maybe you don't need get high-speed machine. You must place about 12000cmp/hour. You can buy quite cheap placement machine. I can't tell what is good
