Electronics Forum | Mon Aug 13 05:56:39 EDT 2007 | chrispy1963
This may sound silly to ask, but does your oven have a center board support by chance? If so is it down when running the boards through the oven? I only ask this because we had the solenoid that operates that function (raise and lower) of the board
Electronics Forum | Tue Nov 09 20:16:31 EST 1999 | Thomas
10% slump). I am finding out their test std used but I think those lab test is different from real reflow as the heat transfer rate of reflow oven is much higher. Any one care to share your views?
Electronics Forum | Sat Feb 08 04:49:09 EST 2014 | cspasol
Anybody know what is the standard CFM of HEXI reflow? Our reflow oven SF-820-LF has no exhaust fan. So from our facility what should be the required CFM.
Electronics Forum | Tue Aug 26 11:15:47 EDT 2003 | blnorman
We use HTN (high temperature nylon - Zytel) connectors in our reflow ovens with no warping, bubbling, or cracking. You can also use PPA (Amodel).
Electronics Forum | Tue Oct 11 11:52:58 EDT 2005 | chunks
Elektrobit (JOT) makes a wave unloader you can use to put your board back onto an edge conveyor (if you are using just a belt on your oven now) and then place a FIFO or Mag Loader after that.
Electronics Forum | Mon Jul 10 05:34:22 EDT 2006 | Loco
If you can, get some samples and just let them run through your oven a couple of times, they dont need to be mounted, just place them on top of some FR4, you'll find out soon enough if the plastic will hold.
Electronics Forum | Mon Jul 10 05:45:50 EDT 2006 | Rob
Hi Dougs, Check out the PBTs (Peak Body temperatures)and time at these temperatures. Remember that they sit higher in the ovens than most other parts. If you have problems getting that data I should have it for Tyco, JAE, Hirose, Harting & a coupl
Electronics Forum | Tue Nov 20 12:25:52 EST 2007 | realchunks
It can be done. But as Rob states, use edge rail oven. We have a product 18 inches long by 9 inches wide with BGAs on both sides.
Electronics Forum | Tue Jul 15 12:11:22 EDT 2008 | gabriella
Hello, I would remove a link, if I was you. As I can hear from you their support is not good anyway(if it is in warranty, they should help you, wright?).
Electronics Forum | Tue Jul 15 13:42:36 EDT 2008 | dwelch123
Ed, sounds like your tech. is full of *hit. He must be fatter and lazier than me!! I'd call Essemtec and make sure that his statement is correct, and if it's true, Gabriella is right. Have a good one bud.
winsouce.jpg)